Open new windowRecommend selecting the PDF printerSee all data sheetsRecommend selecting the PDF printer

FINSA GREENPANEL
TECHNICAL DATA-AVERAGE VALUES
Rev: 02/18/2009
PROPERTIESTEST METHOD UNITS THICKNESSES mm
2838506080100
DENSITY (*)EN 323kg/m3320260220200175160
INTERNAL BONDEN 319N/mm20,150,150,150,150,150,15
BENDING STRENGTH EN 310N/mm210107755
MODULUS OF ELASTICITY EN 310 N/mm210001000900900700700
SURFACE SOUNDNESS EN 311N/mm20,80,80,80,80,80,8
SURFACE ABSORPTION (TWO FACES) EN 382-1mm>150>150>150>150>150>150
MOISTURE CONTENT EN 322%7+/-37+/-37+/-37+/-37+/-37+/-3
GRIT CONTENT ISO 3340 % Weight≤ 0.05≤ 0.05≤ 0.05≤ 0.05≤ 0.05≤ 0.05
FORMALDEHYDE CONTENT EN ISO 12460-5mg/100 g≤ 8≤ 8≤ 8≤ 8≤ 8≤ 8
TOLERANCE ON NOMINAL DIMENSIONS
PROPERTIESTEST METHOD UNITS THICKNESSES mm
2838506080100
THICKNESS EN 324-1mm+/-0,5+/-0,5+/-0,5+/-0,5+/-0,5+/-0,5
LENGTH/WIDTH EN-324-1mm+/- 2 mm/m max +/- 5 mm.+/- 2 mm/m max +/- 5 mm.+/- 2 mm/m max +/- 5 mm.+/- 2 mm/m max +/- 5 mm.+/- 2 mm/m max +/- 5 mm.+/- 2 mm/m max +/- 5 mm.
SQUARENESS EN 324-2mm/m+/-2+/-2+/-2+/-2+/-2+/-2
EDGE STRAIGHTNESS EN-324-2mm/m+/-1,5+/-1,5+/-1,5+/-1,5+/-1,5+/-1,5
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

(SELECT)
Non dangerous product. Adequate ergonomic techniques and IPEs must be used when handling. Dust generated in cutting, sanding, drawmilling and other processes must be extracted from the working environment with the usual procedures in the wood industry as industrial vacuum systems and IPEs use must be observed according to law.