Open new windowRecommend selecting the PDF printerSee all data sheetsRecommend selecting the PDF printerRecommend selecting the PDF printer

SUPERPAN TECH ENCOFORM
TECHNICAL DATA-AVERAGE VALUES
Rev: 10/05/2012
PROPERTIESTEST METHOD UNITS THICKNESSES mm
>13/20>20/25
DENSITY (*)EN 323kg/m3720710
INTERNAL BONDEN 319N/mm20,650,65
BENDING STRENGTH EN 310N/mm22826
MODULUS OF ELASTICITY EN 310 N/mm235003500
THICKNESS SWELLING 24 H EN 317%1010
SURFACE SOUNDNESS EN 311N/mm21,11,1
MOISTURE CONTENT EN 322%8+/-38+/-3
FORMALDEHYDE EMISSION CLASS E1EN ISO 12460-3mg/(m2.h)≤3,5≤3,5
SWELLING IN THICKNESS AFTER CYCLIC TEST (V313)EN 321 / EN 317%1211
INTERNAL BOND AFTER CYCLIC TEST (V313)EN 321 / EN 319N/mm20,220,20
TOLERANCE ON NOMINAL DIMENSIONS
PROPERTIESTEST METHOD UNITS THICKNESSES mm
>13/20>20/25
THICKNESS EN 324-1mm+/- 0,3+/- 0,3
LENGTH/WIDTH EN-324-1mm+/- 5+/- 5
SQUARENESS EN 324-2mm/m+/- 2+/- 2
EDGE STRAIGHTNESS EN-324-2mm/m+/- 1,5+/- 1,5
COATING PROPERTIES
PROPERTIESTEST METHOD UNITS THICKNESSES mm
RESISTANCE TO SCRATCHINGEN 14323N≥ 1.5
RESISTANCE TO CRACKINGEN 14323Rating≥ 3
RESISTANCE TO STAININGEN 14323Rating≥ 3
 
RESISTANCE TO ABRASION:TEST METHOD CLASSIP NUMBER OF TURNS
RESISTANCE TO ABRASION:. DESIGNS (GENERAL APPLICATIONS)EN 14323
1
≥350
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

These physical-mechanical values improve/comply with the P5 classification established in EN 312:2010 European Standard, Tables 7 and 8. Structural boards used in moist environments (Type P5). Requirements for the specified mechanical and swelling properties. Requirements for the resistance to moisture.

SUPERPAN TECH ENCOFORM meets Class E1 requirements (analysed according EN 120) as defined in EN 312:2010 European Standard.

SUPERPAN TECH ENCOFORM holds CE Certificate of conformity of the factory production control issed by the European Notified Body AENOR, number 0099/CPR/A65/0029.

(SELECT)