Open new windowRecommend selecting the PDF printerSee all data sheets

FIMAPLAST / FIBRAPLAST/SUPERPAN DECOR/
TECHNICAL DATA-AVERAGE VALUES
Rev: 04/29/2008
PROPERTIESTEST METHOD UNITS THICKNESSES mm
<1515-20>20
TOLERANCE ON NOMINAL DIMENSIONS
PROPERTIESTEST METHOD UNITS THICKNESSES mm
<1515-20>20
THICKNESS ON NOMINAL DIMENSIONSEN 14323mm+/-0,3 (AI,AV) +0,5/-0,3 (AH)+/-0,3 (AI,AV) +0,5/-0,3 (AH)+/-0,5
THICKNESS WITHIN THE BOARDEN 14323mmmax-min <0,6max-min <0,6max-min <0,6
LENGHT & WIDTHEN 14323mm+/-5+/-5+/-5
FLATNESS (SOLAMENTE EN REVESTIMIENTOS EQUILIBRADOS)UNE-EN-14323mm/m-≤2≤2
COATING PROPERTIES
PROPERTIESTEST METHOD UNITS THICKNESSES mm
RESISTANCE TO SCRATCHINGEN 14323N≥ 1.5
RESISTANCE TO CRACKINGEN 14323Rating≥ 3
SURFACE ASPECTEN 14323Rating4
RESISTANCE TO STAINING (GROUPS 1 Y 2)EN 14323Rating5
RESISTANCE TO STAINING (GROUP 3)EN 14323Rating4
 
VISUAL DEFECTS
EDGES DAMAGEDEN 14323mm≤10
SURFACE DEFECTS. POINTSEN 14323mm2/m2≤2
SURFACE DEFECTS. LENGHTEN 14323mm/m2≤20
RESISTANCE TO ABRASION:TEST METHOD CLASSIP NUMBER OF TURNS
RESISTANCE TO ABRASION:. DESIGNS (GENERAL APPLICATIONS)EN 14323
1
<50
RESISTANCE TO ABRASION. UNICOLORS AND AH PRODUCTSEN 14323
3A
≥150
The physical-mechanical properties of these products will be those of the baseboard used.

Comply with Class E1 requirements, low formaldehyde content, according to UNE-EN 14322 Standard.

HANDLING/STORAGE:

It must always be stored under cover and on a flat surface.
65% of humidity is the ideal condition for its storage, dryer or more moist environments should be avoided.
It must never be in direct contact with water.
Blocks must always be lined up with the vertical.
Never pile up more than 4 heights.
If the packaging is damaged during its handling, it must be packed again so the product is correctly preserved.

If the piling-up conditions or the changes in moisture or temperature above mentioned are not respected in the warehouses or the processing areas, they may cause irreversible deformations and warpings.

(SELECT)
Google+
Google+