Open new windowRecommend selecting the PDF printerSee all data sheets

FIBRALAC E-Z
TECHNICAL DATA-AVERAGE VALUES
Rev: 06/26/2014
PROPERTIESTEST METHOD UNITS THICKNESSES mm
8-9>9/12>12/19>19/30
DENSITY (*)EN 323kg/m3830/800790/770770/760755/720
INTERNAL BONDEN 319N/mm21.31,21,050.90
BENDING STRENGTH EN 310N/mm230303026
MODULUS OF ELASTICITY EN 310 N/mm23000300030002600
THICKNESS SWELLING 24 H EN 317%1614119
DIMENSIONAL MOVEMENT LENGTH/WIDTH EN 318%0.40.40.30.3
DIMENSIONAL MOVEMENT TICKNESS EN 318%6665
SURFACE SOUNDNESS EN 311N/mm2>1.4>1.4>1.4>1.4
SURFACE ABSORPTION (TWO FACES) EN 382-1mm> 150> 150>150>150
MOISTURE CONTENT EN 322%7+/-37 +/- 37 +/- 37 +/- 3
GRIT CONTENT ISO 3340 % Weightmáx. 0,05máx. 0,05máx. 0,05máx. 0,05
FORMALDEHYDE CONTENT EN ISO 12460-5mg/100 g≤ 3≤ 3≤ 3≤ 3
REACTION TO FIRETABLA EN 13986:2004+A1:2015 IEN 13501-1ClassED-s2,d0**D-s2,d0***D-s2,d0
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α 0.100.100.100.10
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α 0.200.200.200.20
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (m·K)0.140.140.130.13
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015db17192323
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ 21/3119/2918/2817/27
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use1111
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015%<5<5<5<5
TOLERANCE ON NOMINAL DIMENSIONS
PROPERTIESTEST METHOD UNITS THICKNESSES mm
8-9>9/12>12/19>19/30
THICKNESS EN 324-1mm+/- 0,2+/- 0,2+/- 0,2+/- 0,3
LENGTH/WIDTH EN-324-1mm+/-2 mm/m, máx 5mm+/-2 mm/m, máx 5mm+/-2 mm/m, máx 5mm+/-2 mm/m, máx 5mm
SQUARENESS EN 324-2mm/m+/- 2,0+/- 2,0+/- 2,0+/- 2,0
EDGE STRAIGHTNESS EN-324-2mm/m+/- 1,5+/- 1,5+/- 1,5+/- 1,5

(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

(**) Mounted without an air gap behind the FIBRALAC E-Z.
Mounted with a closed air gap not more than 22 mm behind the FIBRALAC E-Z classificationD-s2,d2.
Classification E for any other more restrictive condition. Commission Decision 2007/348/EC.

(***) Mounted without an air gap behind the FIBRALAC E-Z, or with a closed air gap behind the FIBRALAC E-Z for thicknesses equal or greater than 15mm or with an open air gap behind the FIBRALAC E-Z for thicknesses equal or greater than 18 mm.
Mounted with a closed air gap not more than 22 mm behind the FIBRALAC E-Z classification D-s2,d2 in thicknesses between 10 and 18 mm. Commission Decision 2007/348/EC.

These physical-mechanical values improve/comply with those established by EN 622-5:2009 European Standard, TABLE 3. Requirements for boards generally used in dry environments.

FIBRALAC E-Z meets Class E1 requirements (analysed according to EN 120) as defined in EN 622-1:2003 European Standard

FIBRALAC E-Z bears Certificate of Conformity with CARB phase 2 requirements regarding formaldehyde emission limits.

(SELECT)
Google+
Google+