Open new windowRecommend selecting the PDF printerSee all data sheets

FIBRANOR EXTERIOR FB NAF / FIBRAPAN EXTERIOR FB NAF
TECHNICAL DATA-AVERAGE VALUES
Rev: 11/14/2017
PROPERTIESTEST METHOD UNITS THICKNESSES mm
>4-6>6-9>9-12
DENSITY (*)EN 323kg/m3880870870
INTERNAL BONDEN 319N/mm21,901,801,70
BENDING STRENGTH EN 310N/mm2555050
MODULUS OF ELASTICITY EN 310 N/mm2370037003700
THICKNESS SWELLING 24 H EN 317%15108
DIMENSIONAL MOVEMENT LENGTH/WIDTH EN 318%0,40,40,3
DIMENSIONAL MOVEMENT TICKNESS EN 318%665
SURFACE SOUNDNESS EN 311N/mm22,02,01,7
SURFACE ABSORPTION (TWO FACES) EN 382-1mm>150>150>150
MOISTURE CONTENT EN 322%7 +/- 37 +/- 37 +/- 3
GRIT CONTENT ISO 3340 % Weight≤ 0,05≤ 0,05≤ 0,05
FORMALDEHYDE CONTENT EN ISO 12460-5mg/100 g<1.0<1.0<1.0
SWELLING IN EDGEEN 13329%252010
REACTION TO FIRETABLA EN 13986:2004+A1:2015 IEN 13501-1ClassEED-s2,d0 (**)
INTERNAL BOND AFTER BOIL TEST (OPTION 2)EN 1087-1 / EN 319N/mm20,600,400,15
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α 0.100.100.10
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α 0.200.200.20
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (m·K)0.170.170.17
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015dbNPD2527
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ 343434
WATER VAPOUR PERMEABILITY
WET CUP
EN 13986:2004+A1:2015
μ
23
23
23
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use1 & 21 & 21 & 2
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015%<5<5<5
TOLERANCE ON NOMINAL DIMENSIONS
PROPERTIESTEST METHOD UNITS THICKNESSES mm
>4-6>6-9>9-12
THICKNESS EN 324-1mm+/- 0,15+/- 0,15+/- 0,15
LENGTH/WIDTH EN-324-1mm+/-2 mm/m, máx 5mm+/-2 mm/m, máx 5mm+/-2 mm/m, máx 5mm
SQUARENESS EN 324-2mm/m+/- 2,0+/- 2,0+/- 2,0
EDGE STRAIGHTNESS EN-324-2mm/m+/- 1,5+/- 1,5+/- 1,5
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

(**) Mounted without an air gap behind the FIBRANOR EXTERIOR FB NAF / FIBRAPAN EXTERIOR FB NAF. Mounted with a closed air gap not more than 22 mm behind the FIBRANOR EXTERIOR FB NAF / FIBRAPAN EXTERIOR FB NAF classificationD-s2,d2. Classification E for any other more restrictive condition. Commission Decision 2007/348/EC.

These physical-mechanical values improve/comply with those established in EN 622-5:2009 European Standard, Table 4, Option 2. Requirements for general purpose boards for use in humid conditions (Type MDF.H).

FIBRANOR EXTERIOR FB NAF / FIBRAPAN EXTERIOR FB NAF meet Class E1 requirements (analysed according EN 120) as defined in EN 622-1:2003 European Standard.

FIBRANOR EXTERIOR FB NAF / FIBRAPAN EXTERIOR FB NAF are manufactured with formaldehyde-free resins.

FIBRANOR EXTERIOR FB NAF / FIBRAPAN EXTERIOR FB NAF is approved by the Air Reosurces Board of the State of California and comply with phase 2 requirements on low formaldehyde emissions and with US EPA TSCA Title VI.

(SELECT)
Google+
Google+