Open new windowRecommend selecting the PDF printerSee all data sheets

SUPERPAN TECH P6
TECHNICAL DATA-AVERAGE VALUES
Rev: 05/11/2016
PROPERTIESTEST METHOD UNITS THICKNESSES mm
>25/32>32/40
DENSITY (*)EN 323kg/m3670650
INTERNAL BONDEN 319N/mm2≥ 0,35≥ 0,30
BENDING STRENGTH EN 310N/mm2≥ 22≥ 20
MODULUS OF ELASTICITY EN 310 N/mm2≥ 2800≥ 2800
THICKNESS SWELLING 24 H EN 317%≤ 14≤ 13
SURFACE SOUNDNESS EN 311N/mm2>1,0>1,0
MOISTURE CONTENT EN 322%8+/-38+/-3
FORMALDEHYDE CONTENT EN ISO 12460-5mg/100 g≤ 8,0≤ 8,0
SCREW HOLDING. EDGEEN-320N≥ 800≥ 800
SCREW HOLDING. SURFACEEN-320N≥ 1000≥ 1000
REACTION TO FIRETABLA EN 13986:2004+A1:2015 IEN 13501-1ClassD-s2, d0D-s2, d0
REACTION TO FIRETABLA EN 13986:2004+A1:2015 IEN 13501-1ClassDflDfl
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α ≥ 0.10≥ 0.10
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α ≥ 0.25≥ 0.25
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (mK)≤ 0.13≤ 0.13
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015db≥ 31≥ 32
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ ≥ 17 / ≥ 50≥ 16 / ≥ 50
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use11
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015%< 5< 5
MECHANICAL DURABILITYEN 13986:2004+A1:2015Kmod KdefEN 1995-1:2004 3.1 & 3.2EN 1995-1:2004 3.1 & 3.2
TOLERANCE ON NOMINAL DIMENSIONS
PROPERTIESTEST METHOD UNITS THICKNESSES mm
>25/32>32/40
THICKNESS EN 324-1mm+/- 0,3+/- 0,3
LENGTH/WIDTH EN-324-1mm+/- 5+/- 5
SQUARENESS EN 324-2mm/m+/- 2+/- 2
EDGE STRAIGHTNESS EN-324-2mm/m+/-1,5+/-1,5
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

These physical-mechanical values improve/comply with the P6 classification established in EN 312:2010 European Standard, Table 9. High performance structural boards used in dry environments (Type P6). Requirements for the mechanical and swelling properties specified.

SUPERPAN TECH P6 meets Class E1 requirements (analysed according EN ISO 12460-5) as defined in EN 312:2010 European Standard.

SUPERPAN TECH P6 holds CE Certificate of conformity of the factory production control issed by the European Notified Body AENOR.

SUPERPAN TECH P6 is endorsed by AITIM Quality Labels.

(SELECT)
Google+
Google+