Open new windowRecommend selecting the PDF printerSee all data sheets

FIBRALAC-OR
TECHNICAL DATA-AVERAGE VALUES
Rev: 08/05/2008
PROPERTIESTEST METHOD UNITS THICKNESSES mm
10/19>19/25
DENSITY (*)EN 323kg/m3760/730730/700
INTERNAL BONDEN 319N/mm21,00,9
BENDING STRENGTH EN 310N/mm23026
MODULUS OF ELASTICITY EN 310 N/mm227002500
THICKNESS SWELLING 24 H EN 317%1210
DIMENSIONAL MOVEMENT LENGTH/WIDTH EN 318%0,40,3
DIMENSIONAL MOVEMENT TICKNESS EN 318%65
SURFACE SOUNDNESS EN 311N/mm21,31,3
SURFACE ABSORPTION (TWO FACES) EN 382-1mm>150>150
MOISTURE CONTENT EN 322%7+/-37+/-3
GRIT CONTENT ISO 3340 % Weight≤ 0,05≤ 0,05
SCREW HOLDING. EDGEEN-320N800750
SCREW HOLDING. SURFACEEN-320N10001000
TOLERANCE ON NOMINAL DIMENSIONS
PROPERTIESTEST METHOD UNITS THICKNESSES mm
10/19>19/25
THICKNESS EN 324-1mm+/- 0,2+/- 0,3
LENGTH/WIDTH EN-324-1mm+/-2 mm/m, máx 5mm+/-2 mm/m, máx 5mm
SQUARENESS EN 324-2mm/m+/- 2,0+/- 2,0
EDGE STRAIGHTNESS EN-324-2mm/m+/- 1,5+/- 1,5
RESISTANCE TO ABRASION:TEST METHOD CLASSIP NUMBER OF TURNS
=EN 14323
4
>350
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

These physical-mechanical values improve/comply with those established by EN 622-5:2006 European Standard, TABLE 3. Requirements for boards generally used in dry environments.

FIBRALAC-OR meets Class E1 requirements (analysed according to EN 120) as defined in EN 622-1:2003 European Standard.

(SELECT)