Open new windowRecommend selecting the PDF printerSee all data sheets

FIBRANOR IGNIFUGO NAF
TECHNICAL DATA-AVERAGE VALUES
Rev: 11/14/2017
PROPERTIESTEST METHOD UNITS THICKNESSES mm
5 - <7
DENSITY (*)EN 323kg/m3870
INTERNAL BONDEN 319N/mm20.65
BENDING STRENGTH EN 310N/mm223
MODULUS OF ELASTICITY EN 310 N/mm22700
THICKNESS SWELLING 24 H EN 317%30
DIMENSIONAL MOVEMENT LENGTH/WIDTH EN 318%0.5
DIMENSIONAL MOVEMENT TICKNESS EN 318%7
SURFACE SOUNDNESS EN 311N/mm21.2
SURFACE ABSORPTION (TWO FACES) EN 382-1mm> 150
MOISTURE CONTENT EN 322%7+/-3
REACTION TO FIREEN 13501-1EuroclassB-s1,d0
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α 0,10
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α 0,20
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (mK)0,15
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015db22
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ 34
WATER VAPOUR PERMEABILITY
WET CUP
EN 13986:2004+A1:2015
μ
23
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use1
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015%<5
FORMALDEHYDE CLASSEN 622-1:2003classE1
TOLERANCE ON NOMINAL DIMENSIONS
PROPERTIESTEST METHOD UNITS THICKNESSES mm
5 - <7
THICKNESS EN 324-1mm+/-0.15
LENGTH/WIDTH EN-324-1mm+/- 2 mm/m max +/- 5 mm.
SQUARENESS EN 324-2mm/m+/- 2 mm/m .
EDGE STRAIGHTNESS EN-324-2mm/m+/-1.5 mm/m .
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

These physical-mechanical values improve/comply with those established by EN 622-5:2009 European Standard, Table 3. Requirements for boards for use in dry conditions (Type MDF).

The quality of FIBRANOR IGNIFUGO NAF is endorsed by AITIM Quality Labels and CE Marking verified by AENOR.

FIBRANOR IGNIFUGO NAF meet Class E1 requirements (analysed according to EN ISO 12460-5) as defined in EN 622-1:2003 European Standard.

FIBRANOR IGNIFUGO NAF is manufactured with resins without formladehyde.

FIBRANOR IGNIFUGO NAF is approved by the Air Reosurces Board of the State of California and comply with phase 2 requirements on low formaldehyde emissions and with US EPA TSCA Title VI.

(SELECT)
Google+
Google+