Open new windowRecommend selecting the PDF printerSee all data sheets

FIBRANOR PRINTERS
TECHNICAL DATA-AVERAGE VALUES
Rev: 01/23/2018
PROPERTIESTEST METHOD UNITS THICKNESSES mm
1,8/2,5>2,5/4>4/6
DENSITY (*)EN 323kg/m3850825800
INTERNAL BONDEN 319N/mm20,900,900,85
BENDING STRENGTH EN 310N/mm2383838
MODULUS OF ELASTICITY EN 310 N/mm2---------
THICKNESS SWELLING 24 H EN 317%453528
DIMENSIONAL MOVEMENT LENGTH/WIDTH EN 318%0,40,40,4
DIMENSIONAL MOVEMENT TICKNESS EN 318%101010
SURFACE SOUNDNESS EN 311N/mm2>1,2>1,2>1,2
SURFACE ABSORPTION (TWO FACES) EN 382-1mm> 200> 200> 200
MOISTURE CONTENT EN 322%7+/-37+/-37+/-3
GRIT CONTENT ISO 3340 % Weight≤ 0,05≤ 0,05≤ 0,05
FORMALDEHYDE CONTENT EN ISO 12460-5mg/100 g≤ 8≤ 8≤ 8
REACTION TO FIRETABLA EN 13986:2004+A1:2015 IEN 13501-1ClassEEE
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α 0.100.100.10
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α 0.200.200.20
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (mK)0.160.150.15
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015dbNPDNPDNPD
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ 333130
WATER VAPOUR PERMEABILITY
WET CUP
EN 13986:2004+A1:2015
μ
22
21
20
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use111
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015%< 5< 5< 5
TOLERANCE ON NOMINAL DIMENSIONS
PROPERTIESTEST METHOD UNITS THICKNESSES mm
1,8/2,5>2,5/4>4/6
THICKNESS EN 324-1mmLijado: +/-0,15 Sin lijar: +/-0,20Lijado: +/-0,15 Sin lijar: +/-0,20Lijado: +/-0,15 Sin lijar: +/-0,20
LENGTH/WIDTH EN-324-1mm+/- 2 mm/m .+/- 2 mm/m .+/- 2 mm/m .
SQUARENESS EN 324-2mm/m+/-1,5 mm/m .+/-1,5 mm/m .+/-1,5 mm/m .
EDGE STRAIGHTNESS EN-324-2mm/m+/-1,5 mm/m .+/-1,5 mm/m .+/-1,5 mm/m .
(*) Values to be considered as a rough guide only.

(**) Commission Decision 2007/348/EC.

These physical-mechanical values improve/comply with those established by EN 622-5:2009 European Standard, Table 3. General requirements for boards to be used in dry conditions.

FIBRANOR IMPRESORES meet Class E1 requirements (analysed according to EN ISO 12460-5) as defined in EN 622-1:2003 European Standard.

(SELECT)
Google+
Google+