Open new windowRecommend selecting the PDF printerSee all data sheets

SUPERPAN STAR
TECHNICAL DATA-AVERAGE VALUES
Rev: 02/17/2012
PROPERTIESTEST METHOD UNITS THICKNESSES mm
16/20>20/25>25/32>32/40>40/44
DENSITY (*)EN 323kg/m3525500500470450
INTERNAL BONDEN 319N/mm20,350,300,250,200,20
BENDING STRENGTH EN 310N/mm21110,59,58,57
MODULUS OF ELASTICITY EN 310 N/mm216001500135012001050
SURFACE SOUNDNESS EN 311N/mm2> 0,8> 0,8> 0,8> 0,8> 0,8
SURFACE ABSORPTION (TWO FACES) EN 382-1mm> 150> 150> 150> 150> 150
MOISTURE CONTENT EN 322%8+/-38+/-38+/-38+/-38+/-3
FORMALDEHYDE CONTENT EN ISO 12460-5mg/100 g≤ 8,0≤ 8,0≤ 8,0≤ 8,0≤ 8,0
TOLERANCE ON NOMINAL DIMENSIONS
PROPERTIESTEST METHOD UNITS THICKNESSES mm
16/20>20/25>25/32>32/40>40/44
THICKNESS EN 324-1mm+/-0,3+/-0,3+/-0,3+/-0,3+/-0,3
LENGTH/WIDTH EN-324-1mm+/-5+/-5+/-5+/-5+/-5
SQUARENESS EN 324-2mm/m+/-2+/-2+/-2+/-2+/-2
EDGE STRAIGHTNESS EN-324-2mm/m+/-1,5+/-1,5+/-1,5+/-1,5+/-1,5
(*) VALUES TO BE CONSIDERED AS JUST A ROUGH GUIDE.

These physical-mechanycal values fullfil P2 technical class defined in the European Standard EN 312:2010, Table 3. - Boards for interior fitments (including furniture) for use in dry conditions.

SUPERPAN STAR fullfis E1 Class requirements defined in the European Standard EN 312:2010 determined by the European Standard EN ISO 12460-5.

(SELECT)