Open new windowRecommend selecting the PDF printerSee all data sheets

FIBRAPLAST IGNIFUGO E-Z
TECHNICAL DATA-AVERAGE VALUES
Rev: 05/09/2019
PROPERTIESTEST METHOD UNITS THICKNESSES mm
10 - 12>12/15>15/19>19/30
DENSITY (*)EN 323kg/m3830/800800/790790/780780/760
INTERNAL BONDEN 319N/mm20.600550.550.55
BENDING STRENGTH EN 310N/mm222202018
MODULUS OF ELASTICITY EN 310 N/mm22500220022002100
THICKNESS SWELLING 24 H EN 317%15121210
DIMENSIONAL MOVEMENT LENGTH/WIDTH EN 318%0.40.40.40.3
DIMENSIONAL MOVEMENT TICKNESS EN 318%6665
SURFACE SOUNDNESS EN 311N/mm21.21.21.21.2
SURFACE ABSORPTION (TWO FACES) EN 382-1mm> 150> 150> 150> 150
MOISTURE CONTENT EN 322%7+/-37+/-37+/-37+/-3
GRIT CONTENT ISO 3340 % Weight≤ 0.05≤ 0.05≤ 0.05≤ 0.05
REACTION TO FIREEN 13501-1EuroclassB-s1,d0 (!)B-s1,d0 (!)B-s1,d0 (!)B-s1,d0 (!)
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α 0.100.100.100.10
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α 0.200.200.200.20
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (mK)0.140.140.130.13
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015db25272930
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ 30292828
WATER VAPOUR PERMEABILITY
WET CUP
EN 13986:2004+A1:2015
μ
20
19
18
18
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use1111
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015%< 5< 5< 5< 5
TOLERANCE ON NOMINAL DIMENSIONS
PROPERTIESTEST METHOD UNITS THICKNESSES mm
10 - 12>12/15>15/19>19/30
THICKNESS ON NOMINAL DIMENSIONSEN 14323mm+/-0.3 (Clase 1) +0.5/-0.3 (Clase 3A)+/-0.3 (Clase 1) +0.5/-0.3 (Clase 3A)+/-0.3 (Clase 1) +0.5/-0.3 (Clase 3A)+/-0,5
THICKNESS WITHIN THE BOARDEN 14323mmmax-min <0,6max-min <0,6max-min <0,6max-min <0,6
LENGHT & WIDTHEN 14323mm+/-5+/-5+/-5+/-5
FLATNESS (SOLAMENTE EN REVESTIMIENTOS EQUILIBRADOS)UNE-EN-14323mm/m--≤ 2≤ 2
COATING PROPERTIES
PROPERTIESTEST METHOD UNITS THICKNESSES mm
RESISTANCE TO SCRATCHINGEN 14323N≥ 1.5
RESISTANCE TO CRACKINGEN 14323Rating≥ 3
SURFACE ASPECTEN 14323Rating4
RESISTANCE TO STAINING (GROUPS 1 Y 2)EN 14323Rating5
RESISTANCE TO STAINING (GROUP 3)EN 14323Rating4
COLOR RESISTANCE TO UV LIGHT (XENON LAMP)EN 14323Blue wool scale, n
>6
 
VISUAL DEFECTS
EDGES DAMAGEDEN 14323mm≤ 10
SURFACE DEFECTS. POINTSEN 14323mm2/m2≤ 2
SURFACE DEFECTS. LENGHTEN 14323mm/m2≤ 20
RESISTANCE TO ABRASION:TEST METHOD CLASSIP NUMBER OF TURNS
RESISTANCE TO ABRASION:. DESIGNS (GENERAL APPLICATIONS)EN 14323
1
<50
RESISTANCE TO ABRASION. UNICOLORS AND AH PRODUCTSEN 14323
3A
≥ 150
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

FIBRAPLAST IGNIFUGO E-Z is a melamine faced medium density fibreboard type MFB EN 622-5 MDF

FIBRAPLAST IGNIFUGO E-Z holds CE certificate of constancy of performance nr 0099/CPR/A65/0003 issued by AENOR,
Link to certificate: https://drive.google.com/open?id=1WzOlwK1MpcCZJyQIY9H_oNkVfNr6ATF8

(!) Reaction to fire classification report and field of application, link to report:
https://drive.google.com/open?id=1nav_YCeP7AmJcZeQqfniWvswHV-hLqT6
link to EXAP report: https://drive.google.com/open?id=1hd4HzAIQhCk7g6FCcY6a8dBV9NR2gf85
Individual test reports avaliable under request.

FIBRAPLAST IGNIFUGO E-Z is US EPA TSCA TITLE VI and CARB phase 2 compliant as it is manufactured aplying melamine paper onto a FIBRAPAN IGNIFUGO E-Z board which is US EPA TSCA TITLE VI and CARB phase 2 certified by TPC-15.
Link to certificate: https://drive.google.com/open?id=0B-Xe1750UJbXWnJQbEJyT1ctYVE
Link to quarterly atestation: https://drive.google.com/open?id=0B-Xe1750UJbXclZJN0JnYmQxYlE

The quality of FIBRAPLAST IGNIFUGO E-Z is endorsed by AITIM Quality Labels.
Link to certificate: https://drive.google.com/open?id=0B-Xe1750UJbXMTVJa283SndhcE0

HANDLING/STORAGE:
It must always be stored under cover and on a flat surface.
65% of humidity is the ideal condition for its storage, dryer or more moist environments should be avoided.
It must never be in direct contact with water.
Blocks must always be lined up with the vertical.
Never pile up more than 4 heights.
If the packaging is damaged during its handling, it must be packed again so the product is correctly preserved.

If the piling-up conditions or the changes in moisture or temperature above mentioned are not respected in the warehouses or the processing areas, they may cause irreversible deformations and warpings.

(SELECT)