Open new windowRecommend selecting the PDF printerSee all data sheets

FIBRAPLAST EXTERIOR NAF
TECHNICAL DATA-AVERAGE VALUES
Rev: 07/15/2016
PROPERTIESTEST METHOD UNITS THICKNESSES mm
>12/18
DENSITY (*)EN 323kg/m3800
INTERNAL BONDEN 319N/mm2≥ 1.0
BENDING STRENGTH EN 310N/mm2≥ 30
MODULUS OF ELASTICITY EN 310 N/mm2≥ 2700
THICKNESS SWELLING 24 H EN 317%≤ 7
DIMENSIONAL MOVEMENT LENGTH/WIDTH EN 318%≤ 0,3
DIMENSIONAL MOVEMENT TICKNESS EN 318%≤ 5
SURFACE SOUNDNESS EN 311N/mm2≥ 1.2
SURFACE ABSORPTION (TWO FACES) EN 382-1mm≥ 150
MOISTURE CONTENT EN 322%7+/-3
GRIT CONTENT ISO 3340 % Weight≤ 0,05
FORMALDEHYDE CONTENT EN ISO 12460-5mg/100 g<1.5
REACTION TO FIRETABLA EN 13986:2004+A1:2015 IEN 13501-1ClassD-s2,d0 (**)
INTERNAL BOND AFTER BOIL TEST (OPTION 2)EN 1087-1 / EN 319N/mm2≥ 0,20
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α ≥ 0.10
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α ≥ 0.20
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (mK)≤ 0.15
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015db≥ 28
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ ≥ 20 / ≥30
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use1 & 2
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015%<5
TOLERANCE ON NOMINAL DIMENSIONS
PROPERTIESTEST METHOD UNITS THICKNESSES mm
>12/18
THICKNESS EN 324-1mm+/-0,20
LENGTH/WIDTH EN-324-1mm+/-2 mm/m, mx 5mm
SQUARENESS EN 324-2mm/m+/-2
EDGE STRAIGHTNESS EN-324-2mm/m+/-1,5+/-1,5
RESISTANCE TO ABRASION:TEST METHOD CLASSIP NUMBER OF TURNS WR NUMBER OF TURNS
RESISTANCE TO ABRASION:. DESIGNS (GENERAL APPLICATIONS)EN 14323
1
< 50
< 150
RESISTANCE TO ABRASION. UNICOLORS AND AH PRODUCTSEN 14323
3A
≥ 150
≥ 350
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

(**) Mounted without an air gap behind the FIBRAPLAST EXTERIOR NAF, or with a closed air gap behind the FIBRAPLAST EXTERIOR NAF for thicknesses equal or greater than 15mm or with an open air gap behind the FIBRAPLAST EXTERIOR NAF for thicknesses equal or greater than 18 mm. Mounted with a closed air gap not more than 22 mm behind the FIBRAPLAST EXTERIOR NAF classification D-s2,d2 in thicknesses between 10 and 18 mm. Commission Decision 2007/348/EC.

These physical-mechanical values improve/comply with those established in EN 622-5:2009 European Standard, Table 4, Option 2. Requirements for general purpose boards for use in humid conditions (Type MDF.H).

FIBRAPLAST EXTERIOR NAF meet Class E1 requirements (analysed according ISO EN 12460-3) as defined in EN 14322:2004 European Standard.

FIBRAPLAST EXTERIOR NAF in manufactured with NAF MDF Certificated -CARB Appr. N-10-079- and comply with phase 2 requirements on low formaldehyde emissions.

(SELECT)
Google+
Google+