Open new windowRecommend selecting the PDF printerSee all data sheets

SUPERPAN H DECK
TECHNICAL DATA-AVERAGE VALUES
Rev: 03/01/2018
PROPERTIESTEST METHOD UNITS THICKNESSES mm
10-12>12-20
DENSITY (*)EN 323kg/m3700680
INTERNAL BONDEN 319N/mm20,450,45
BENDING STRENGTH EN 310N/mm21616
MODULUS OF ELASTICITY EN 310 N/mm224002300
THICKNESS SWELLING 24 H EN 317%1714
FORMALDEHYDE EMISSION CLASS E1EN ISO 12460-3mg/(m2.h)<3.5<3.5
REACTION TO FIRETABLA 8 EN 13986:2004+A1:2015 IEN 13501-1ClassD-d2,d0 (**)D-s2,d0 (***)
REACTION TO FIRETABLA 8 EN 13986:2004+A1:2015 IEN 13501-1ClassDfl-s1Dfl-s1
SWELLING IN THICKNESS AFTER CYCLIC TEST (V313)EN 321 / EN 317%1413
INTERNAL BOND AFTER CYCLIC TEST (V313)EN 321 / EN 319N/mm20.150.13
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α 0.100.10
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α 0.250.25
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (mK)0.140.13
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015db2428
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ 5050
WATER VAPOUR PERMEABILITY
WET CUP
EN 13986:2004+A1:2015
μ
16
16
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use1 & 21 & 2
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015ppm<5<5
TOLERANCE ON NOMINAL DIMENSIONS
PROPERTIESTEST METHOD UNITS THICKNESSES mm
10-12>12-20
THICKNESS ON NOMINAL DIMENSIONSEN 14323mm+0,5/-0,3+0,5/-0,3
THICKNESS WITHIN THE BOARDEN 14323mmmax-min <0,6max-min <0,6
LENGHT & WIDTHEN 14323mm+/-5+/-5
COATING PROPERTIES
PROPERTIESTEST METHOD UNITS THICKNESSES mm
RESISTANCE TO ABRASIONEN 438-2IP NUMBER OF TURNS 450
POROSITY INTERNARatingSin porosidad
CURE GRADEINTERNARating5
WATER STEAM RESISTANCE.EN 14323Rating5
RESISTANCE TO STAININGEN 14323Rating5
SLIPPERY RESISTANCE ON DRY SURFACEUNE ENV 12633Usrv> 45
SLIPPERY RESISTANCE ON WET SURFACEUNE ENV 12633Usrv> 15
 
(*) Values to be considered as a rough guide only.

(**) Mounted without an air gap behind the SUPERPAN H DECK. Mounted with a closed air gap not more than 22 mm behind the SUPERPAN H DECK classification D-s2,d2. Classification E for any other more restrictive condition. Commission Decision 2007/348/EC.

(***) Mounted without an air gap behind the SUPERPAN H DECK, or with a closed air gap behind the SUPERPAN H DECK for thicknesses equal or greater than 15mm or with an open air gap behind the SUPERPAN H DECK for thicknesses equal or greater than 18 mm. Mounted with a closed air gap not more than 22 mm behind the SUPERPAN H DECK classification D-s2,d2 in thicknesses between 10 and 18 mm. Commission Decision 2007/348/EC.

These physical-mechanical values improve/comply with the P3 classification established in EN 312:2010 European Standard, Tables 4 and 5. Non-structural boards used in moist environments (Type P3). Requirements for the specified mechanical and swelling properties. Requirements for the resistance to moisture (Option 1).

SUPERPAN H DECK meets Class E1 requirements as defined in EN 14322:2017 European Standard.

(SELECT)