Open new windowRecommend selecting the PDF printerSee all data sheets

FIBRAPAN IGNIFUGO (FINSA OREMBER)
TECHNICAL DATA-AVERAGE VALUES
Rev: 07/19/2018
PROPERTIESTEST METHOD UNITS THICKNESSES mm
8 - 10>10 - 12>12 - 19>19 - 30
DENSITY (*)EN 323kg/m3830/820820/790790/770760/740
INTERNAL BONDEN 319N/mm20.650.600.550.55
BENDING STRENGTH EN 310N/mm223222018
MODULUS OF ELASTICITY EN 310 N/mm22700250022002100
THICKNESS SWELLING 24 H EN 317%17151210
DIMENSIONAL MOVEMENT LENGTH/WIDTH EN 318%0.50.50.50.4
DIMENSIONAL MOVEMENT TICKNESS EN 318%7776
SURFACE SOUNDNESS EN 311N/mm21.21.21.21.2
SURFACE ABSORPTION (TWO FACES) EN 382-1mm> 150> 150> 150> 150
MOISTURE CONTENT EN 322%7+/-37+/-37+/-37+/-3
FORMALDEHYDE CONTENT EN ISO 12460-5mg/100 g≤ 8 ≤ 8≤ 8≤ 8
REACTION TO FIREEN 13501-1EuroclassB-s2,d0B-s2,d0B-s2,d0B-s2,d0
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α 0,100,100,100.10
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α 0,200,200,200.20
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (mK)0,140,140,140.13
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015db26272931
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ 32302928
WATER VAPOUR PERMEABILITY
WET CUP
EN 13986:2004+A1:2015
μ
21
20
19
18
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use1111
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015% < 5< 5< 5< 5
TOLERANCE ON NOMINAL DIMENSIONS
PROPERTIESTEST METHOD UNITS THICKNESSES mm
8 - 10>10 - 12>12 - 19>19 - 30
THICKNESS EN 324-1mm+/-0.20+/-0.20+/-0.20+/-0.30
LENGTH/WIDTH EN-324-1mm+/- 2 mm/m max +/- 5 mm.+/- 2 mm/m max +/- 5 mm.+/- 2 mm/m max +/- 5 mm.+/- 2 mm/m max +/- 5 mm.
SQUARENESS EN 324-2mm/m+/- 2 mm/m .+/- 2 mm/m+/- 2 mm/m+/- 2 mm/m
EDGE STRAIGHTNESS EN-324-2mm/m+/-1.5 mm/m .+/-1.5 mm/m+/-1.5 mm/m+/-1.5 mm/m
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

These physical-mechanical values improve/comply with those established by EN 622-5:2009 European Standard, Table 3. Requirements for general purspose boards for use in dry conditions (Type MDF.E1).

FIBRAPAN IGNIFUGO meet Class E1 requirements (analysed according EN ISO 12460-5) as defined in EN 622-1 European Standard.

The quality of FIBRAPAN IGNIFUGO is endorsed by AITIM Quality Label

FIBRAPAN IGNIFUGO bear CE Marking, certiffied by AENOR, number 0099/CPR/A65/0031.

(SELECT)
Google+
Google+