Open new windowRecommend selecting the PDF printerSee all data sheets

IBERPAN
TECHNICAL DATA-AVERAGE VALUES
Rev: 01/14/2018
PROPERTIESTEST METHOD UNITS THICKNESSES mm
>30/45>45/60>60/7080
DENSITY (*)EN 323kg/m3680/675675/640610580
INTERNAL BONDEN 319N/mm20,550,500,500.50
BENDING STRENGTH EN 310N/mm220171616
MODULUS OF ELASTICITY EN 310 N/mm22000180017001700
THICKNESS SWELLING 24 H EN 317%8666
DIMENSIONAL MOVEMENT LENGTH/WIDTH EN 318%0,250,250,250.25
DIMENSIONAL MOVEMENT TICKNESS EN 318%5555
SURFACE SOUNDNESS EN 311N/mm21,21,21,21.2
SURFACE ABSORPTION (TWO FACES) EN 382-1mm>150>150>150>150
MOISTURE CONTENT EN 322%7+/-37+/-37+/-37+/-3
GRIT CONTENT ISO 3340 % Weight≤ 0.05≤ 0.05≤ 0.05≤ 0.05
FORMALDEHYDE CONTENT EN ISO 12460-5mg/100 g≤ 8≤ 8≤ 8≤ 8
SCREW HOLDING. EDGEEN 320N700700700700
SCREW HOLDING. SURFACEEN 320N1000100010001000
REACTION TO FIRETABLA 8 EN 13986:2004+A1:2015 IEN 13501-1ClassD-s2,d0(**)D-s2,d0(**)D-s2,d0(**)E (**)
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α 0.10.10.10.1
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α 0.20.20.20.2
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (mK)0.120.110.100.10
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015db30/3333/3434/3535
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ 24232019
15
14
12
11
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use1111
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015%<5<5<5<5
TOLERANCE ON NOMINAL DIMENSIONS
PROPERTIESTEST METHOD UNITS THICKNESSES mm
>30/45>45/60>60/7080
THICKNESS EN 324-1mm+/-0,3+/-0,3+/-0,3+/-0,3
LENGTH/WIDTH EN-324-1mm+/- 2 mm/m max +/- 5 mm.+/- 2 mm/m max +/- 5 mm.+/- 2 mm/m max +/- 5 mm.+/- 2 mm/m max +/- 5 mm.
SQUARENESS EN 324-2mm/m+/-2+/-2+/-2+/-2
EDGE STRAIGHTNESS EN-324-2mm/m+/-1,5+/-1,5+/-1,5+/-1,5
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

(**)Commission Decision 2007/348/EC.

These physical-mechanical values improve/comply with those established in EN 622-5:2009 European Standard, Table 3. Requirements for boards used in dry environments.

IBERPAN meets Class E1 requirements (analysed according EN120) as defined in EN 622-1:2003 European Standard.

IBERPAN STRIP meets the physical-mechanical characteristics described in this technical data sheet.

The quality of IBERPAN is endorse by AITIM Quality Labels

(SELECT)
Google+
Google+