Open new windowRecommend selecting the PDF printerSee all data sheets

COMPAC PLUS IGNIFUGO
TECHNICAL DATA-AVERAGE VALUES
Rev: 01/16/2017
PROPERTIESTEST METHOD UNITS THICKNESSES mm
8-12>12-13
DENSITY (*)EN 323kg/m310501050
INTERNAL BONDEN 319N/mm21,81,8
BENDING STRENGTH EN 310N/mm24545
MODULUS OF ELASTICITY EN 310 N/mm240004000
THICKNESS SWELLING 24 H EN 317%86
DIMENSIONAL MOVEMENT LENGTH/WIDTH EN 318%0,400.40
DIMENSIONAL MOVEMENT TICKNESS EN 318%6,06,0
SURFACE SOUNDNESS EN 311N/mm21,71,7
SURFACE ABSORPTION (TWO FACES) EN 382-1mm>150>150
MOISTURE CONTENT EN 322%7+/-37+/-3
GRIT CONTENT ISO 3340 % Weight≤ 0,05≤ 0,05
FORMALDEHYDE CONTENT EN ISO 12460-5mg/100 g<8<8
SWELLING IN EDGEEN 13329%1515
REACTION TO FIREEN 13501-1EuroclassB-s1,d0B-s1,d0
INTERNAL BOND AFTER BOIL TEST (OPTION 2)EN 1087-1 / EN 319N/mm20,20,15
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α 0.100.10
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α 0.200.20
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (mK)0.190.19
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015db2629
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ 4343
WATER VAPOUR PERMEABILITY
WET CUP
EN 13986:2004+A1:2015
μ
30
30
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use1 & 21 & 2
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015%< 5< 5
MECHANICAL DURABILITYEN 13986:2004+A1:2015Kmod KdefTabla 3.1, EN 1995-1:2004; Tabla 3.2, EN 1995-1:2004; Tabla 3.1, EN 1995-1:2004; Tabla 3.2, EN 1995-1:2004;
TOLERANCE ON NOMINAL DIMENSIONS
PROPERTIESTEST METHOD UNITS THICKNESSES mm
8-12>12-13
THICKNESS EN 324-1mm+/-0,20+/-0,20
LENGTH/WIDTH EN-324-1mm+/- 2 mm/m max 5 mm+/- 2 mm/m max 5 mm
SQUARENESS EN 324-2mm/m+/- 2,0+/- 2,0
EDGE STRAIGHTNESS EN-324-2mm/m+/- 1,5+/- 1,5
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

These physical-mechanical values improve/comply with those established by EN 622-5:2009 European Standard, Table 6 "Requirements for structural boards used in humid conditions (Type MDF.HLS)".

COMPAC PLUS IGNIFUGO meets Class E1 requirements (analysed according EN ISO 12460-5) as defined in EN 622-1:2003 European Standard.

COMPAC PLUS IGNIFUGO is endorsed by AITIM Quality Labels.

COMPAC PLUS IGNIFUGO holds CE certificate of conformity of the factory production control issued by AENOR

(SELECT)
Google+
Google+