Open new windowRecommend selecting the PDF printerSee all data sheets

FIBRAPRINT SEALING
TECHNICAL DATA-AVERAGE VALUES
Rev: 01/16/2018
PROPERTIESTEST METHOD UNITS THICKNESSES mm
2/4
DENSITY (*)EN 323kg/m3825
INTERNAL BONDEN 319N/mm20,9
BENDING STRENGTH EN 310N/mm238
THICKNESS SWELLING 24 H EN 317%35
DIMENSIONAL MOVEMENT LENGTH/WIDTH EN 318%0,4
DIMENSIONAL MOVEMENT TICKNESS EN 318%10
SURFACE SOUNDNESS EN 311N/mm2>1,2
SURFACE ABSORPTION (TWO FACES) EN 382-1mm>150
MOISTURE CONTENT EN 322%7+/-2
GRIT CONTENT ISO 3340 % Weight≤ 0,05
TOLERANCE ON NOMINAL DIMENSIONS
PROPERTIESTEST METHOD UNITS THICKNESSES mm
2/4
THICKNESS EN 324-1mm+/-0,20
LENGTH/WIDTH EN-324-1mm+/- 2 mm/m, máx +/- 5 mm
SQUARENESS EN 324-2mm/m+/-2
EDGE STRAIGHTNESS EN-324-2mm/m+/-1,5
RESISTANCE TO ABRASION:TEST METHOD CLASSIP NUMBER OF TURNS
=EN 14323
4
>350
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

The MDF baseboard used in the manufacturing of FIBRAPRINT SEALING meets Class E1 requirements (analysed according to EN 120) as defined in EN 622-1:2003 European Standard.

Medium density fibre board (FIBRANOR). It is fine-grain sanded and coated with a water-based paint. All this provides a polished surface, excellent as baseboard for the application of further treatments, either with a paint roller, a paint curtain or a paint gun.

The type of paint used makes it compatible with most of the paints that can be applied over it: acrylic paints, nitrocelulosic paints, polyurethane paints, etc.

Available colours: white and cream.

(SELECT)