Open new windowRecommend selecting the PDF printerSee all data sheets

FIBRACOLOUR NEGRO IGNIFUGO
TECHNICAL DATA-AVERAGE VALUES
Rev: 11/17/2015
PROPERTIESTEST METHOD UNITS THICKNESSES mm
10-12>12-19
DENSITY (*)EN 323kg/m3860/820800/780
INTERNAL BONDEN 319N/mm20,600,55
BENDING STRENGTH EN 310N/mm22220
MODULUS OF ELASTICITY EN 310 N/mm225002200
THICKNESS SWELLING 24 H EN 317%1512
DIMENSIONAL MOVEMENT LENGTH/WIDTH EN 318%0,40,4
DIMENSIONAL MOVEMENT TICKNESS EN 318%66
SURFACE SOUNDNESS EN 311N/mm21,21,2
SURFACE ABSORPTION (TWO FACES) EN 382-1mm>150>150
MOISTURE CONTENT EN 322%7 +/- 37 +/- 3
GRIT CONTENT ISO 3340 % Weight≤ 0,05≤ 0,05
FORMALDEHYDE CONTENT EN ISO 12460-5mg/100 g≤ 8≤ 8
REACTION TO FIREEN 13501-1EuroclassB-s2,d0B-s2,d0
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α 0.100.10
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α 0.200.20
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (m·K)0.140.14
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015db2527
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ 20 / 3019 / 29
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use11
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015%<5<5
TOLERANCE ON NOMINAL DIMENSIONS
PROPERTIESTEST METHOD UNITS THICKNESSES mm
10-12>12-19
THICKNESS EN 324-1mm+/- 0,20+/- 0,20
LENGTH/WIDTH EN-324-1mm+/-2 mm/m, máx 5mm+/-2 mm/m, máx 5mm
SQUARENESS EN 324-2mm/m+/- 2,0+/- 2,0
EDGE STRAIGHTNESS EN-324-2mm/m+/- 1,5+/- 1,5
COLOUR
PROPERTIESTEST METHOD UNITS THICKNESSES mm
LIGHTNESS ON FACES ( L* )CIE 1976 (CIELAB)--L * < 35
MAGENTA-GREEN COORDINATE ON FACES ( A* )CIE 1976 (CIELAB)--0≤a≤1
YELLOW-BLUE COORDINATE ON FACES ( B* )CIE 1976 (CIELAB)--0≤b≤4
DETERMINATION OF LIGHT FASTNESSISO 2809. EN ISO 11341Blue Scale>6
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

These physical-mechanical values improve/comply with those established by EN 622-5:2009 European Standard, Table 3. Requirements for general purpose boards for use in dry conditions (type MDF).

FIBRACOLOUR NEGRO IGNIFUGO meets Class E1 requirements (analysed according to EN-ISO 12460-5) as defined in EN 622-1:2003 European Standard.

FIBRACOLOUR NEGRO IGNIFUGOT holds CE certificate of conformity of the factory production control issued by AENOR, number 0099/CPR/A65/0031.

(SELECT)
Google+
Google+