Open new windowRecommend selecting the PDF printerSee all data sheets

FIBRALAC TOP E-Z
TECHNICAL DATA-AVERAGE VALUES
Rev: 10/14/2015
PROPERTIESTEST METHOD UNITS THICKNESSES mm
8-9>9/12>12/19>19/30
DENSITY (*)EN 323kg/m3840/825825/805805/785780/755
INTERNAL BONDEN 319N/mm21.31,21,050.90
BENDING STRENGTH EN 310N/mm230303026
MODULUS OF ELASTICITY EN 310 N/mm23000300030002600
THICKNESS SWELLING 24 H EN 317%1614119
DIMENSIONAL MOVEMENT LENGTH/WIDTH EN 318%0.40.40.30.3
DIMENSIONAL MOVEMENT TICKNESS EN 318%6665
SURFACE SOUNDNESS EN 311N/mm2>1.4>1.4>1.4>1.4
SURFACE ABSORPTION (TWO FACES) EN 382-1mm> 150> 150>150>150
MOISTURE CONTENT EN 322%7+/-37 +/- 37 +/- 37 +/- 3
GRIT CONTENT ISO 3340 % Weightmáx. 0,05máx. 0,05máx. 0,05máx. 0,05
FORMALDEHYDE CONTENT EN ISO 12460-5mg/100 g≤ 3≤ 3≤ 3≤ 3
TOLERANCE ON NOMINAL DIMENSIONS
PROPERTIESTEST METHOD UNITS THICKNESSES mm
8-9>9/12>12/19>19/30
THICKNESS EN 324-1mm+/- 0,2+/- 0,2+/- 0,2+/- 0,3
LENGTH/WIDTH EN-324-1mm+/-2 mm/m, máx 5mm+/-2 mm/m, máx 5mm+/-2 mm/m, máx 5mm+/-2 mm/m, máx 5mm
SQUARENESS EN 324-2mm/m+/- 2,0+/- 2,0+/- 2,0+/- 2,0
EDGE STRAIGHTNESS EN-324-2mm/m+/- 1,5+/- 1,5+/- 1,5
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

These physical-mechanical values improve/comply with those established by EN 622-5:2009 European Standard, TABLE 3. Requirements for boards generally used in dry environments.

FIBRALAC E-Z meets Class E1 requirements (analysed according to EN 120) as defined in EN 622-1:2003 European Standard.

FIBRALAC E-Z bears Certificate of Conformity with CARB phase 2 requirements regarding formaldehyde emission limits.

(SELECT)
Google+
Google+