Open new windowRecommend selecting the PDF printerSee all data sheets

FIBRACOLOUR BLACK
TECHNICAL DATA-AVERAGE VALUES
Rev: 02/07/2018
PROPERTIESTEST METHOD UNITS THICKNESSES mm
3-4>4-6>6-9>9-12>12-19>19-30>30-40
DENSITY (*)EN 323kg/m3850800790/750750/740740/710710/700690/680
INTERNAL BONDEN 319N/mm20,900,700,600,600,550,550,50
BENDING STRENGTH EN 310N/mm235303025252018
MODULUS OF ELASTICITY EN 310 N/mm23000270027002500220021002000
THICKNESS SWELLING 24 H EN 317%3530171512108
DIMENSIONAL MOVEMENT LENGTH/WIDTH EN 318%0,40,40,40,40.40,40.4
DIMENSIONAL MOVEMENT TICKNESS EN 318%101066666
SURFACE SOUNDNESS EN 311N/mm21,21,21,21,21,21,21.2
SURFACE ABSORPTION (TWO FACES) EN 382-1mm>150>150>150>150>150>150>150
MOISTURE CONTENT EN 322%7 +/- 37 +/- 37 +/- 37 +/- 37 +/- 37 +/- 37 +/- 3
GRIT CONTENT ISO 3340 % Weight0,050,050,050,050,050,050,05
FORMALDEHYDE CONTENT EN ISO 12460-5mg/100 g≤ 8≤ 8≤ 8≤ 8≤ 8≤ 8≤ 8
REACTION TO FIRETABLA 8 EN 13986:2004+A1:2015 IEN 13501-1ClassEEED-s2,d0(**)D-s2,d0(***)D-s2,d0D-s2,d0
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α 0.100.100.100.100.100.100.10
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α 0.200.200.200.200.200.200.20
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (m·K)0.160.150.130.130.120.120.12
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015dbNPDNPD2426283032
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ 33302827252426
WATER VAPOUR PERMEABILITY
WET CUP
EN 13986:2004+A1:2015
μ
22
20
18
17
16
16
16
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use1111111
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015%<5<5<5<5<5<5<5
TOLERANCE ON NOMINAL DIMENSIONS
PROPERTIESTEST METHOD UNITS THICKNESSES mm
3-4>4-6>6-9>9-12>12-19>19-30>30-40
THICKNESS EN 324-1mm+/- 0,15+/- 0,15+/- 0,20+/- 0,20+/- 0,20+/- 0,30+/- 0,30
LENGTH/WIDTH EN-324-1mm+/-2 mm/m, máx 5mm+/-2 mm/m, máx 5mm+/-2 mm/m, máx 5mm+/-2 mm/m, máx 5mm+/-2 mm/m, máx 5mm+/-2 mm/m, máx 5mm+/-2 mm/m, máx 5mm
SQUARENESS EN 324-2mm/m+/- 2,0+/- 2,0+/- 2,0+/- 2,0+/- 2,0+/- 2,0+/- 2,0
EDGE STRAIGHTNESS EN-324-2mm/m+/- 1,5+/- 1,5+/- 1,5+/- 1,5+/- 1,5+/- 1,5+/- 1,5
COLOUR
PROPERTIESTEST METHOD UNITS THICKNESSES mm
LIGHTNESS ON FACES ( L* )CIE 1976 (CIELAB)--L * < 35
MAGENTA-GREEN COORDINATE ON FACES ( A* )CIE 1976 (CIELAB)--0≤a≤1
YELLOW-BLUE COORDINATE ON FACES ( B* )CIE 1976 (CIELAB)--0≤b≤4
DETERMINATION OF LIGHT FASTNESSISO 2809. EN ISO 11341Blue Scale>6
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

(**) Mounted without an air gap behind the FIBRACOLOUR BLACK. Mounted with a closed air gap not more than 22 mm behind the FIBRACOLOUR BLACK classification D-s2,d2. Classification E for any other more restrictive condition. Commission Decision 2007/348/EC.

(***) Mounted without an air gap behind the FIBRACOLOUR BLACK, or with a closed air gap behind the FIBRACOLOUR BLACK for thicknesses equal or greater than 15mm or with an open air gap behind the FIBRACOLOUR BLACK for thicknesses equal or greater than 18 mm. Mounted with a closed air gap not more than 22 mm behind the FIBRACOLOUR BLACK classification D-s2,d2 in thicknesses between 10 and 18 mm. Commission Decision 2007/348/EC.

These physical-mechanical values improve/comply with those established by EN 622-5:2009 European Standard, Table 3. Requirements for boards for use in dry conditions (type MDF)

FIBRACOLOUR BLACK meets Class E1 requirements (analysed according to EN ISO 12460-5) as defined in EN 622-1:2003 European Standard.

(SELECT)
Google+
Google+