Open new windowRecommend selecting the PDF printerSee all data sheets

SUPERPAN DECOR IGNIFUGO
TECHNICAL DATA-AVERAGE VALUES
Rev: 12/19/2017
PROPERTIESTEST METHOD UNITS THICKNESSES mm
8/<1212/20>20/25>25/32>32/40>40/44
DENSITY (*)EN 323kg/m3760-730730-690680660650650
INTERNAL BONDEN 319N/mm20,400,350,300,250,200,20
BENDING STRENGTH EN 310N/mm2141413121110
MODULUS OF ELASTICITY EN 310 N/mm2220021001800150013001150
THICKNESS SWELLING 2 H EN 317%≤ 6≤ 6≤ 6≤ 6≤ 6≤ 6
MOISTURE CONTENT EN 322%8+/-38+/-38+/-38+/-38+/-38+/-3
FORMALDEHYDE EMISSION CLASS E1EN ISO 12460-3mg/(m2.h)≤ 3,5≤ 3,5≤ 3,5≤ 3,5≤ 3,5≤ 3,5
REACTION TO FIREEN 13501-1EuroclassB-s1,d0B-s1,d0B-s1,d0B-s1,d0B-s1,d0B-s1,d0
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α 0.10.10.10.10.10.1
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α 0.250.250.250.250.250.25
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (mK)0.150.140.130.120.120.12
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015db242729303132
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ 505050505050
WATER VAPOUR PERMEABILITY
WET CUP
EN 13986:2004+A1:2015
μ
18
17
16
16
16
16
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use111111
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015%≤5≤5≤5≤5≤5≤5
TOLERANCE ON NOMINAL DIMENSIONS
PROPERTIESTEST METHOD UNITS THICKNESSES mm
8/<1212/20>20/25>25/32>32/40>40/44
THICKNESS ON NOMINAL DIMENSIONSEN 14323mm+/-0,3 (AI,AV) +0,5/-0,3 (AH)+/-0,3 (AI,AV) +0,5/-0,3 (AH)+/- 0,5+/- 0,5+/- 0,5+/- 0,5
THICKNESS WITHIN THE BOARDEN 14323mmmax-min <0,6max-min <0,6max-min <0,6max-min <0,6max-min <0,6max-min <0,6
LENGHT & WIDTHEN 14323mm+/-5+/-5+/-5+/-5+/-5+/-5
FLATNESS (SOLAMENTE EN REVESTIMIENTOS EQUILIBRADOS)UNE-EN-14323mm/m--≤2≤2≤2≤2
COATING PROPERTIES
PROPERTIESTEST METHOD UNITS THICKNESSES mm
RESISTANCE TO SCRATCHINGEN 14323N≥ 1.5
RESISTANCE TO CRACKINGEN 14323Rating≥ 3
SURFACE ASPECTEN 14323Rating4
RESISTANCE TO STAININGEN 14323Rating≥ 3
COLOR RESISTANCE TO UV LIGHT (XENON LAMP)EN 14323Blue wool scale, n
>6
 
VISUAL DEFECTS
EDGES DAMAGEDEN 14323mm≤ 10
SURFACE DEFECTS. POINTSEN 14323mm2/m2≤ 2
SURFACE DEFECTS. LENGHTEN 14323mm/m2≤ 20
RESISTANCE TO ABRASION:TEST METHOD CLASSIP NUMBER OF TURNS
RESISTANCE TO ABRASION:. DESIGNS (GENERAL APPLICATIONS)EN 14323
1
< 50
RESISTANCE TO ABRASION. UNICOLORS AND AH PRODUCTSEN 14323
3A
≥ 150
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

These physical-mechanical values improve/comply with the P2 classification established in EN 312:2010 European Standard, Table 3. Boards for indoor applications (including furniture) in dry environments (Type P2). Requirements for the specified mechanical properties.

This product meets Class E1 requirements (analysed according EN ISO 12460-5) as defined in EN 14322:2017 European Standard.

This product is endorsed by AITIM Quality Labels.

The quality of this product is endorsed by AITIM Quality Labels and CE Marking verified by AENOR, certificate number 0099/CPR/A65/0043.


HANDLING/STORAGE:

It must always be stored under cover and on a flat surface.
65% of humidity is the ideal condition for its storage, dryer or more moist environments should be avoided.
It must never be in direct contact with water.
Blocks must always be lined up with the vertical.
Never pile up more than 4 heights.
If the packaging is damaged during its handling, it must be packed again so the product is correctly preserved.

If the piling-up conditions or the changes in moisture or temperature above mentioned are not respected in the warehouses or the processing areas, they may cause irreversible deformations and warpings.

(SELECT)