Open new windowRecommend selecting the PDF printerSee all data sheets


FINANCIERA MADERERA S.A. (FINSA)
N-550, KM 57
15890 SANTIAGO DE COMPOSTELA (A CORUÑA)
SPAIN
DECLARATION OF PERFORMANCE Nº 0006710/26/2018
FIMAPAN E-Z
Manufactured at: Finsa Santiago
Carretera N-550 km 57
15707 SANTIAGO DE COMPOSTELA (ESPAÑA)
Manufactured at: Finsa Cella I
Partida de Hazas s/n
44370 CELLA (ESPAÑA)
PRODUCT TYPEINTENDED USEAVCP*
P2Internal use as non structural component in dry conditions4
*Assessment and verification of constancy of performance system according to Annex V of regulation (EU) No 305/2011

TECHNICAL DATA-AVERAGE VALUES
Rev: 05/20/2016
PROPERTIESTEST METHOD UNITS THICKNESSES mm
8/13>13/20>20/25>25/32>32/40
DENSITY (*)EN 323kg/m3700/650650/620620/595590/580575/560
INTERNAL BONDEN 319N/mm2≥ 0,40≥ 0,35≥ 0,30≥ 0,25≥ 0,20
BENDING STRENGTH EN 310N/mm2≥ 11≥ 11≥ 10,5≥ 9,5≥ 8,5
MODULUS OF ELASTICITY EN 310 N/mm2≥ 1800≥ 1600≥ 1500≥ 1350≥ 1200
THICKNESS SWELLING 2 H EN 317%≤ 6≤ 6≤ 6≤ 6≤ 6
SURFACE SOUNDNESS EN 311N/mm2≥ 0,8≥ 0,8≥ 0,8≥ 0,8≥ 0,8
MOISTURE CONTENT EN 322%8+/-38+/-38+/-38+/-38+/-3
FORMALDEHYDE CONTENT EN ISO 12460-5mg/100 g<3<3<3<3<3
REACTION TO FIRETABLA EN 13986:2004+A1:2015 IEN 13501-1ClassD-s2,d0**D-s2,d0***D-s2,d0D-s2,d0D-s2,d0
REACTION TO FIRETABLA EN 13986:2004+A1:2015 IEN 13501-1ClassDfl-s1****Dfl-s1Dfl-s1Dfl-s1Dfl-s1
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α ≥ 0.10≥ 0.10≥ 0.10≥ 0.10≥ 0.10
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α ≥ 0.25≥ 0.25≥ 0.25≥ 0.25≥ 0.25
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (m·K)≤ 0.14≤ 0.13≤ 0.12≤ 0.12≤ 0.12
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015db≥ 24≥ 26≥ 28≥ 29≥ 31
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ ≥ 16 / ≥ 50≥ 15 / ≥ 50≥ 15 / ≥ 50≥ 15 /≥ 50≥ 15 / ≥ 50
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use11111
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015%<5<5<5<5<5
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

(**) Minimun thickness 9mm.Mounted without an air gap behind the FIMAPAN E-Z. Mounted with a closed air gap not more than 22 mm behind the FIMAPAN E-Z classificationD-s2,d2. Classification E for any other more restrictive condition. Commission Decision 2007/348/EC.

(***) Mounted without an air gap behind the FIMAPAN E-Z, or with a closed air gap behind the FIMAPAN E-Z for thicknesses equal or greater than 15mm or with an open air gap behind the FIMAPAN E-Z for thicknesses equal or greater than 18 mm. Mounted with a closed air gap not more than 22 mm behind the FIMAPAN E-Z classification D-s2,d2 in thicknesses between 10 and 18 mm. Commission Decision 2007/348/EC

(****)Minimun thickness 9 mm

These physical-mechanical values improve/comply with the P2 classification established in EN 312:2010 European Standard, Table 3. Boards for indoor applications (including furniture) in dry environments (Type P2). Requirements for the specified mechanical properties.

The quality of FIMAPAN E-Z is endorsed by AITIM Quality Label.

FIMAPAN E-Z meets Class E1 requirements (analysed according EN ISO 12460-5) as defined in EN 622-1:2010 European Standard.

FIMAPAN E-Z bears Certificate of Conformity with CARB phase 2 requirements regarding formaldehyde emission limits.

The performance of the reference product are in compliance with the performance declared above
This Declaration of Perfomance is issued under the sole responsibility of FINANCIERA MADERERA S.A. (FINSA)
Javier Portela
FINSA R&D + Quality Director
Santiago de Compostela 10/26/2018