Open new windowRecommend selecting the PDF printerSee all data sheets


FINANCIERA MADERERA S.A. (FINSA)
N-550, KM 57
15890 SANTIAGO DE COMPOSTELA (A CORUÑA)
SPAIN
DECLARATION OF PERFORMANCE Nº 0009710/26/2018
FIBRAPAN IGNIFUGO NAF
Manufactured at: Finsa Fibranor
Políg. Ind. de Rábade
27370 RÁBADE (ESPAÑA)
PRODUCT TYPEINTENDED USEAVCP*NOTIFIED BODY AND REFERENCECERTIFICATE NUMBER
MDFInternal use as non structural components in dry conditions1AENOR 00990099/CPR/A65/0032
*Assessment and verification of constancy of performance system according to Annex V of regulation (EU) No 305/2011

TECHNICAL DATA-AVERAGE VALUES
Rev: 11/14/2017
PROPERTIESTEST METHOD UNITS THICKNESSES mm
7 - 9>9 - 12>12 - 18
DENSITY (*)EN 323kg/m3870/860860/850850/840
INTERNAL BONDEN 319N/mm20.650.600.55
BENDING STRENGTH EN 310N/mm2232220
MODULUS OF ELASTICITY EN 310 N/mm2270025002200
THICKNESS SWELLING 24 H EN 317%171512
DIMENSIONAL MOVEMENT LENGTH/WIDTH EN 318%0.50.50.5
DIMENSIONAL MOVEMENT TICKNESS EN 318%777
SURFACE SOUNDNESS EN 311N/mm21.21.21.2
SURFACE ABSORPTION (TWO FACES) EN 382-1mm> 150> 150> 150
MOISTURE CONTENT EN 322%7+/-37+/-37+/-3
REACTION TO FIREEN 13501-1EuroclassB-s1,d0B-s1,d0B-s1,d0
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α 0,100,100,10
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α 0,200,200,20
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (m·K)0,150,150,15
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015db242629
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ 333332
WATER VAPOUR PERMEABILITY
WET CUP
EN 13986:2004+A1:2015
μ
22
22
22
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use111
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015%<5<5<5
FORMALDEHYDE CLASSEN 622-1:2003classE1E1E1
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

These physical-mechanical values improve/comply with those established by EN 622-5:2009 European Standard, Table 3. Requirements for boards for use in dry conditions (Type MDF).

The quality of FIBRAPAN IGNIFUGO NAF is endorsed by AITIM Quality Labels and CE Marking verified by AENOR.

FIBRAPAN IGNIFUGO NAF meets Class E1 requirements (analysed according to EN ISO 12460-5) as defined in EN 622-1:2003 European Standard.

FIBRAPAN IGNIFUGO NAF are manufactured with resins without formladehyde.

FIBRAPAN IGNIFUGO NAF is approved by the Air Reosurces Board of the State of California and comply with phase 2 requirements on low formaldehyde emissions and with US EPA TSCA Title VI.

The performance of the reference product are in compliance with the performance declared above
This Declaration of Perfomance is issued under the sole responsibility of FINANCIERA MADERERA S.A. (FINSA)
Javier Portela
FINSA R&D + Quality Director
Santiago de Compostela 10/26/2018
Google+
Google+