Open new windowRecommend selecting the PDF printerSee all data sheets


FINANCIERA MADERERA S.A. (FINSA)
N-550, KM 57
15890 SANTIAGO DE COMPOSTELA (A CORUÑA)
SPAIN
DECLARATION OF PERFORMANCE Nº 0015610/26/2018
SUPERPAN IGNIFUGO
Manufactured at: Luso Finsa
Estrada Nacional 234, Km 92.7
3524-952 NELAS (PORTUGAL)
PRODUCT TYPEINTENDED USEAVCP*NOTIFIED BODY AND REFERENCECERTIFICATE NUMBER
P2Internal use as non structural component in dry conditions1AENOR 00990099/CPR/A65/0039
*Assessment and verification of constancy of performance system according to Annex V of regulation (EU) No 305/2011

TECHNICAL DATA-AVERAGE VALUES
Rev: 07/04/2017
PROPERTIESTEST METHOD UNITS THICKNESSES mm
8/<1212/20>20/25>25/32>32/40>40/44
DENSITY (*)EN 323kg/m3760-730730-690680660650650
INTERNAL BONDEN 319N/mm20,400,350,300,250,200,20
BENDING STRENGTH EN 310N/mm2141413121110
MODULUS OF ELASTICITY EN 310 N/mm2220021001800150013001150
THICKNESS SWELLING 2 H EN 317%666666
SURFACE SOUNDNESS EN 311N/mm2> 0,8> 0,8> 0,8> 0,8> 0,8> 0,8
MOISTURE CONTENT EN 322%8+/-38+/-38+/-38+/-38+/-38+/-3
FORMALDEHYDE CONTENT EN ISO 12460-5mg/100 g≤ 8,0≤ 8,0≤ 8,0≤ 8,0≤ 8,0≤ 8,0
REACTION TO FIREEN 13501-1EuroclassB-s2,d0B-s1,d0B-s1,d0B-s1,d0B-s1,d0B-s1,d0
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α 0.10.10.10.10.10.1
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α 0.250.250.250.250.250.25
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (m·K)0.150.140.130.120.120.12
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015db242729303132
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ 505050505050
WATER VAPOUR PERMEABILITY
WET CUP
EN 13986:2004+A1:2015
μ
18
17
16
16
16
16
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use111111
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015%≤ 5≤ 5≤ 5≤ 5≤ 5≤ 5
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

These physical-mechanical values improve/comply with the P2 classification established in EN 312:2010 European Standard, Table 3. Boards for indoor applications (including furniture) in dry environments (Type P2). Requirements for the specified mechanical properties.

This product meets Class E1 requirements (analysed according EN ISO 12460-5) as defined in EN 312:2010 European Standard.

This product is endorsed by AITIM Quality Labels.

The quality of this product is endorsed by AITIM Quality Labels and CE Marking verified by AENOR, certificate number 0099/CPR/A65/0039.

The performance of the reference product are in compliance with the performance declared above
This Declaration of Perfomance is issued under the sole responsibility of FINANCIERA MADERERA S.A. (FINSA)
Javier Portela
FINSA R&D + Quality Director
Santiago de Compostela 10/26/2018