Open new windowRecommend selecting the PDF printerSee all data sheets


FINANCIERA MADERERA S.A. (FINSA)
N-550, KM 57
15890 SANTIAGO DE COMPOSTELA (A CORUÑA)
SPAIN
DECLARATION OF PERFORMANCE Nº 0004011/08/2018
SUPERPAN
Manufactured at: Luso Finsa
Estrada Nacional 234, Km 92.7
3524-952 NELAS (PORTUGAL)
PRODUCT TYPEINTENDED USEAVCP*
P2Internal use as non structural component in dry conditions4
*Assessment and verification of constancy of performance system according to Annex V of regulation (EU) No 305/2011

TECHNICAL DATA-AVERAGE VALUES
Rev: 11/08/2018
PROPERTIESTEST METHOD UNITS THICKNESSES mm
8/13>13/20>20/25>25/32>32/40>40/44
DENSITY (*)EN 323kg/m3720-680650-640625620610600
INTERNAL BONDEN 319N/mm20,400,350,300,250,200,20
BENDING STRENGTH EN 310N/mm2141413121110
MODULUS OF ELASTICITY EN 310 N/mm2220021001800150013001150
THICKNESS SWELLING 2 H EN 317%666666
SURFACE SOUNDNESS EN 311N/mm2>0,8>0,8>0,8>0,8>0,8>0,8
MOISTURE CONTENT EN 322%8+/-38+/-38+/-38+/-38+/-38+/-3
FORMALDEHYDE CONTENT EN ISO 12460-5mg/100 g≤8,0≤8,0≤8,0≤8,0≤8,0≤8,0
SCREW HOLDING. EDGEEN-320N600600600600600600
SCREW HOLDING. SURFACEEN-320N800800800800800800
REACTION TO FIRETABLA 8 EN 13986:2004+A1:2015 IEN 13501-1ClassD-s2,d0**D-s2,d0***D-s2,d0D-s2,d0D-s2,d0D-s2,d0
REACTION TO FIRETABLA 8 EN 13986:2004+A1:2015 IEN 13501-1ClassDfl-s1****Dfl-s1Dfl-s1Dfl-s1Dfl-s1Dfl-s1
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α 0.10.10.10.10.10.1
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α 0.250.250.250.250.250.25
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (m·K)0.140.140.130.120.120.12
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015db24/2626/2828/2929/3131/3232/33
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ 505050505050
WATER VAPOUR PERMEABILITY
WET CUP
EN 13986:2004+A1:2015
μ
16
16
16
16
16
16
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use111111
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015%< 5< 5< 5< 5< 5< 5
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

(**) Minimun thickness 9mm.Mounted without an air gap behind the SUPERPAN. Mounted with a closed air gap not more than 22 mm behind the SUPERPAN classificationD-s2,d2. Classification E for any other more restrictive condition. Commission Decision 2007/348/EC.

(***) Mounted without an air gap behind the SUPERPAN, or with a closed air gap behind the SUPERPAN for thicknesses equal or greater than 15mm or with an open air gap behind the SUPERPAN for thicknesses equal or greater than 18 mm. Mounted with a closed air gap not more than 22 mm behind the SUPERPAN classification D-s2,d2 in thicknesses between 10 and 18 mm. Commission Decision 2007/348/EC

(****) Minimun thickness 9 mm.
.
These physical-mechanical values improve/comply with the P2 classification established in EN 312:2010 European Standard, Table 3. Boards for indoor applications (including furniture) in dry environments (Type P2). Requirements for the specified mechanical properties.

This product meets Class E1 requirements (analysed according EN ISO 12460-5) as defined in EN 312:2010 European Standard.

This product is endorsed by AITIM Quality Labels.

The performance of the reference product are in compliance with the performance declared above
This Declaration of Perfomance is issued under the sole responsibility of FINANCIERA MADERERA S.A. (FINSA)
Javier Portela
FINSA R&D + Quality Director
Santiago de Compostela 11/08/2018
Google+
Google+