Open new windowRecommend selecting the PDF printerSee all data sheets


FINANCIERA MADERERA S.A. (FINSA)
N-550, KM 57
15890 SANTIAGO DE COMPOSTELA (A CORUÑA)
SPAIN
DECLARATION OF PERFORMANCE Nº 0021210/26/2018
SUPERPAN TECH P4 DECOR IGNIFUGO
Manufactured at: Luso Finsa
Estrada Nacional 234, Km 92.7
3524-952 NELAS (PORTUGAL)
PRODUCT TYPEINTENDED USEAVCP*NOTIFIED BODY AND REFERENCECERTIFICATE NUMBER
P4Internal use as structural component in dry conditions4AENOR 00990099/CPR/A65/0042
*Assessment and verification of constancy of performance system according to Annex V of regulation (EU) No 305/2011

PROPERTIESTEST METHOD UNITS THICKNESSES mm
8/<1212/13>13/20>20/25>25/32>32/40>40/44
CHARACTERISTIC STRENGTH
TABLE 5 EN 12369-1:2001
....
BENDING FMEN 13986:2004+A1:2015N/mm214.214.212.510.89.27.55.8
COMPRESSION FCEN 13986:2004+A1:2015N/mm212.012.011.19.69.07.66.1
TENSION FTEN 13986:2004+A1:2015N/mm28.98.97.96.96.15.04.4
PANEL SHEAR FVEN 13986:2004+A1:2015N/mm26.66.66.15.54.84.44.2
PLANAR SHEAR FREN 13986:2004+A1:2015N/mm21.81.81.61.41.21.11.0
CHARACTERISTIC STIFFNESS (MOE)
TABLE 5 EN 12369-1:2001
TENSION ETEN 13986:2004+A1:2015N/mm21800180017001600140012001100
COMPRESSION ECEN 13986:2004+A1:2015N/mm21800180017001600140012001100
BENDING EMEN 13986:2004+A1:2015N/mm23200320029002700240021001800
PANEL SHEAR FVEN 13986:2004+A1:2015N/mm2860860830770680600550
POINT LOAD FULS
FOR FLOORS AND ROOFS
EN 13986:2004+A1:2015N/mm2NPDNPDNPDNPDNPDNPDNPD
POINT LOAD MEAN STIFFNESS
FOR FLOORS AND ROOFS
EN 13986:2004+A1:2015N/mm2NPDNPDNPDNPDNPDNPDNPD
POINT LOAD SERVICEABILITY FSLS
FOR FLOORS AND ROOFS
EN 13986:2004+A1:2015N/mm2NPDNPDNPDNPDNPDNPDNPD
RACKING RESISTANCE
FOR WALLS
EN 13986:2004+A1:2015N/mm2NPDNPDNPDNPDNPDNPDNPD
SOFT BODY IMPACT RESISTANCE
PARA FORJADOS, CUBIERTAS Y MUROS
EN 13986:2004+A1:2015N/mm2NPDNPDNPDNPDNPDNPDNPD
FINANCIERA MADERERA S.A. (FINSA)
N-550, KM 57
15890 SANTIAGO DE COMPOSTELA (A CORUÑA)
SPAIN
DECLARATION OF PERFORMANCE Nº 0021210/26/2018
SUPERPAN TECH P4 DECOR IGNIFUGO
TECHNICAL DATA-AVERAGE VALUES
Rev: 12/19/2017
PROPERTIESTEST METHOD UNITS THICKNESSES mm
8/<1212/13>13/20>20/25>25/32>32/40>40/44
DENSITY (*)EN 323kg/m3760-750730690680660650650
INTERNAL BONDEN 319N/mm20.400.400.350,300,250.200.20
BENDING STRENGTH EN 310N/mm223232120191817
MODULUS OF ELASTICITY EN 310 N/mm22900290028002500220021002000
THICKNESS SWELLING 24 H EN 317%19161515151414
SURFACE SOUNDNESS EN 311N/mm2>0,81,01,01,01,01,01,0
MOISTURE CONTENT EN 322%8+/-38+/-38+/-38+/-38+/-38+/-38+/-3
FORMALDEHYDE EMISSION CLASS E1EN ISO 12460-3mg/(m2.h)≤ 3,5≤ 3,5≤ 3,5≤ 3,5≤ 3,5≤ 3,5≤ 3,5
REACTION TO FIREEN 13501-1EuroclassB-s1, d0B-s1, d0B-s1, d0B-s1, d0B-s1, d0B-s1, d0B-s1, d0
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α 0.100.100.100.100.100.100.10
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α 0.250.250.250.250.250.250.25
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (m·K)0.150.150.140.140.130.130.13
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015db24262729303132
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ 50505050505050
WATER VAPOUR PERMEABILITY
WET CUP
EN 13986:2004+A1:2015
μ
18
17
17
16
16
16
16
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use1111111
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015%< 5< 5< 5< 5< 5< 5< 5
MECHANICAL DURABILITYEN 13986:2004+A1:2015Kmod KdefEN 1995-1:2004 3.1 & 3.2EN 1995-1:2004 3.1 & 3.2EN 1995-1:2004 3.1 & 3.2EN 1995-1:2004 3.1 & 3.2EN 1995-1:2004 3.1 & 3.2EN 1995-1:2004 3.1 & 3.2EN 1995-1:2004 3.1 & 3.2
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

These physical-mechanical values improve/comply with the P4 classification established in EN 312:2010 European Standard, Table 6. Structural boards used in dry conditions (Type P4). Requirements for the specified mechanical and swelling properties.

This product meets Class E1 requirements (analysed according EN ISO 12460-3) as defined in EN 14322:2017 European Standard.

This product is endorsed by AITIM Quality Labels.

The quality of this product is endorsed by AITIM Quality Labels and CE Marking verified by AENOR, certificate number 0099/CPR/A65/0042.


HANDLING/STORAGE:

It must always be stored under cover and on a flat surface.
65% of humidity is the ideal condition for its storage, dryer or more moist environments should be avoided.
It must never be in direct contact with water.
Blocks must always be lined up with the vertical.
Never pile up more than 4 heights.
If the packaging is damaged during its handling, it must be packed again so the product is correctly preserved.

If the piling-up conditions or the changes in moisture or temperature above mentioned are not respected in the warehouses or the processing areas, they may cause irreversible deformations and warpings.

The performance of the reference product are in compliance with the performance declared above
This Declaration of Perfomance is issued under the sole responsibility of FINANCIERA MADERERA S.A. (FINSA)
Javier Portela
FINSA R&D + Quality Director
Santiago de Compostela 10/26/2018
Google+
Google+