Open new windowRecommend selecting the PDF printerSee all data sheets


FINANCIERA MADERERA S.A. (FINSA)
N-550, KM 57
15890 SANTIAGO DE COMPOSTELA (A CORUÑA)
SPAIN
DECLARATION OF PERFORMANCE Nº 0015510/26/2018
COMPACMEL PLUS IGNIFUGO
Manufactured at: Finsa Padrón
Paraíso s/n
15900 PADRÓN (ESPAÑA)
PRODUCT TYPEINTENDED USEAVCP*NOTIFIED BODY AND REFERENCECERTIFICATE NUMBER
MDF.HLSInternal use as structural component in humid conditions1AENOR 00990099/CPR/A65/0038
*Assessment and verification of constancy of performance system according to Annex V of regulation (EU) No 305/2011

PROPERTIESTEST METHOD UNITS THICKNESSES mm
8
CHARACTERISTIC STRENGTH
TABLE 5 EN 12369-1:2001
BENDING FMEN 13986:2004+A1:2015N/mm222
COMPRESSION FCEN 13986:2004+A1:2015N/mm218.0
TENSION FTEN 13986:2004+A1:2015N/mm218.0
PANEL SHEAR FVEN 13986:2004+A1:2015N/mm28.5
PLANAR SHEAR FREN 13986:2004+A1:2015N/mm2NPD
CHARACTERISTIC STIFFNESS (MOE)
TABLE 5 EN 12369-1:2001
CHARACTERISTIC DENSITYEN 13986:2004+A1:2015N/mm21050
TENSION ETEN 13986:2004+A1:2015N/mm23100
COMPRESSION ECEN 13986:2004+A1:2015N/mm23100
BENDING EMEN 13986:2004+A1:2015N/mm23700
PANEL SHEAR FVEN 13986:2004+A1:2015N/mm21000
POINT LOAD FULS
FOR FLOORS AND ROOFS
EN 13986:2004+A1:2015N/mm2NPD
POINT LOAD MEAN STIFFNESS
FOR FLOORS AND ROOFS
EN 13986:2004+A1:2015N/mm2NPD
POINT LOAD SERVICEABILITY FSLS
FOR FLOORS AND ROOFS
EN 13986:2004+A1:2015N/mm2NPD
RACKING RESISTANCE
FOR WALLS
EN 13986:2004+A1:2015N/mm2NPD
SOFT BODY IMPACT RESISTANCE
PARA FORJADOS, CUBIERTAS Y MUROS
EN 13986:2004+A1:2015N/mm2NPD
TECHNICAL DATA-AVERAGE VALUES
Rev: 05/26/2017
PROPERTIESTEST METHOD UNITS THICKNESSES mm
8
DENSITY (*)EN 323kg/m31050
INTERNAL BONDEN 319N/mm21,8
BENDING STRENGTH EN 310N/mm245
MODULUS OF ELASTICITY EN 310 N/mm24000
THICKNESS SWELLING 24 H EN 317%2
DIMENSIONAL MOVEMENT LENGTH/WIDTH EN 318%0,40
DIMENSIONAL MOVEMENT TICKNESS EN 318%6,0
SURFACE SOUNDNESS EN 311N/mm21,7
MOISTURE CONTENT EN 322%7+/-3
FORMALDEHYDE EMISSION CLASS E1EN ISO 12460-3mg/(m2.h)≤ 3,5
SWELLING IN EDGEEN 13329%10
REACTION TO FIREEN 13501-1EuroclassB-s1,d0
INTERNAL BOND AFTER BOIL TEST (OPTION 2)EN 1087-1 / EN 319N/mm20,20
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α 0.10
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α 0.20
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (m·K)0.19
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015db26
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ 43
WATER VAPOUR PERMEABILITY
WET CUP
EN 13986:2004+A1:2015
μ
30
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use1 & 2
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015%< 5
MECHANICAL DURABILITYEN 13986:2004+A1:2015Kmod KdefTabla 3.1, EN 1995-1:2004; Tabla 3.2, EN 1995-1:2004;

(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.
(**) Commercial size available .
(***) Custom-cut boards.

COMPACMEL PLUS IGNIFUGO standard colours: Gris I, Beige, Amarillo Sol, Mandarina, Rojo, Verde Natural, Azul Eo and White SR fulfill resistance to abrasion class 3B (>650revs) defined in the european standard EN 14322.

These physical-mechanical values improve/comply with those established by EN 622-5:2009 European Standard, Table 6 "Requirements for structural boards used in humid conditions (Type MDF.HLS)"

COMPACMEL PLUS IGNIFUGO meets Class E1 requirements (analysed according EN ISO 12460-3) as defined in EN 622-1:2003 European Standard.

COMPACMEL PLUS IGNIFUGO holds CE Certificate of conformity of the factory production control issed by the European Notified Body AENOR, number 0099/CPR/A65/0038.

The performance of the reference product are in compliance with the performance declared above
This Declaration of Perfomance is issued under the sole responsibility of FINANCIERA MADERERA S.A. (FINSA)
Javier Portela
FINSA R&D + Quality Director
Santiago de Compostela 10/26/2018