Open new windowRecommend selecting the PDF printerSee all data sheets


FINANCIERA MADERERA S.A. (FINSA)
N-550, KM 57
15890 SANTIAGO DE COMPOSTELA (A CORUÑA)
SPAIN
DECLARATION OF PERFORMANCE Nº 0002310/26/2018
FIBRAPAN IGNIFUGO E-Z
Manufactured at: Finsa Padrón
Paraíso s/n
15900 PADRÓN (ESPAÑA)
PRODUCT TYPEINTENDED USEAVCP*NOTIFIED BODY AND REFERENCECERTIFICATE NUMBER
MDFInternal use as non structural components in dry conditions1AENOR 00990099/CPR/A65/0025
*Assessment and verification of constancy of performance system according to Annex V of regulation (EU) No 305/2011

TECHNICAL DATA-AVERAGE VALUES
Rev: 01/30/2018
PROPERTIESTEST METHOD UNITS THICKNESSES mm
10/12>12/19>19/30
DENSITY (*)EN 323kg/m3830/790790/770770/740
INTERNAL BONDEN 319N/mm20.600.550.55
BENDING STRENGTH EN 310N/mm2222018
MODULUS OF ELASTICITY EN 310 N/mm2250022002100
THICKNESS SWELLING 24 H EN 317%151210
DIMENSIONAL MOVEMENT LENGTH/WIDTH EN 318%0.50.50.4
DIMENSIONAL MOVEMENT TICKNESS EN 318%776
SURFACE SOUNDNESS EN 311N/mm21.21.21.2
SURFACE ABSORPTION (TWO FACES) EN 382-1mm> 150> 150> 150
MOISTURE CONTENT EN 322%7+/-37+/-37+/-3
FORMALDEHYDE CONTENT EN ISO 12460-5mg/100 g≤ 3≤ 3≤ 3
REACTION TO FIREEN 13501-1EuroclassB-s1,d0B-s1,d0B-s1,d0
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α 0.100.100.10
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α 0.200.200.20
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (m·K)0.140.140.13
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015db252729
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ 302928
WATER VAPOUR PERMEABILITY
WET CUP
EN 13986:2004+A1:2015
μ
20
19
18
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use111
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015%< 5< 5< 5
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

These physical-mechanical values improve/comply with those established by EN 622-5:2009 European Standard, Table 3. Requirements for general purpose boards for use in dry conditions (type MDF.E1).

The quality of FIBRAPAN IGNIFUGO E-Z is endorsed by AITIM Quality Label.

FIBRAPAN IGNIFUGO E-Z bear CE Marking, certiffied by AENOR, number 0099/CPD/A65/0025.

FIBRAPAN IGNIFUGO E-Z bears Certificate of Conformity with CARB phase 2 and US EPA TSCA TITLE VI requirements, regarding low formaldehyde emission limits.

The performance of the reference product are in compliance with the performance declared above
This Declaration of Perfomance is issued under the sole responsibility of FINANCIERA MADERERA S.A. (FINSA)
Javier Portela
FINSA R&D + Quality Director
Santiago de Compostela 10/26/2018