Open new windowRecommend selecting the PDF printerSee all data sheets


FINANCIERA MADERERA S.A. (FINSA)
N-550, KM 57
15890 SANTIAGO DE COMPOSTELA (A CORUÑA)
SPAIN
DECLARATION OF PERFORMANCE Nº 0020506/18/2019
FIBRANOR NAF / FIBRAPAN NAF
Manufactured at: Finsa Fibranor
Políg. Ind. de Rábade
27370 RÁBADE (ESPAÑA)
Manufactured at: Finsa Padrón
Paraíso s/n
15900 PADRÓN (ESPAÑA)
TECHNICAL CLASSINTENDED USEAVCP*
MDFInternal use as non structural component in dry conditions4
*Assessment and verification of constancy of performance system according to Annex V of regulation (EU) No 305/2011

TECHNICAL DATA-AVERAGE VALUES
Rev: 06/14/2019
PROPERTIESTEST METHOD UNITS THICKNESSES mm
2-2.5>2.5/4>4/6>6/9>9/12>12/19>19/30
DENSITY (*)EN 323kg/m3890/860860/835835/820820/800800/770770/760750/695
INTERNAL BONDEN 319N/mm21.21.00.900.800.700.600.55
BENDING STRENGTH EN 310N/mm227272727262522
MODULUS OF ELASTICITY EN 310 N/mm2------27002700260025002300
THICKNESS SWELLING 24 H EN 317%3528251412109
DIMENSIONAL MOVEMENT LENGTH/WIDTH EN 318%0,40,40,40,40,40.40.3
DIMENSIONAL MOVEMENT TICKNESS EN 318%1010106665
SURFACE SOUNDNESS EN 311N/mm2>1.2>1.2>1.2>1.2>1.2>1.2>1.2
SURFACE ABSORPTION (TWO FACES) EN 382-1mm>150>150>150>150>150>150>150
MOISTURE CONTENT EN 322%7+/-37+/-37+/-37+/-37+/-37+/-37+/-3
GRIT CONTENT ISO 3340 % Weight≤ 0,05≤ 0,05≤ 0,05≤ 0,05≤ 0,05≤ 0,05≤ 0,05
REACTION TO FIRETABLA 8 EN 13986:2004+A1:2015 IEN 13501-1ClassEEEED-s2,d0 (**)D-s2,d0 (***)D-s2,d0
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α 0.100.100.100.100.100.100.10
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α 0.200.200.200.200.200.200.20
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (m·K)0.150.150.140.140.140.130.12
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015dbNPDNPDNPDNPD2727/2929/31
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ 33313130292825
WATER VAPOUR PERMEABILITY
WET CUP
EN 13986:2004+A1:2015
μ
22
21
21
20
19
18
16
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use1111111
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015ppm< 5< 5< 5< 5< 5< 5< 5
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

(**) Mounted without an air gap behind the FIBRANOR NAF / FIBRAPAN NAF. Mounted with a closed air gap not more than 22 mm behind the FIBRANOR NAF / FIBRAPAN NAF classificationD-s2,d2. Classification E for any other more restrictive condition. Commission Decision 2007/348/EC.

(***) Mounted without an air gap behind the FIBRANOR NAF / FIBRAPAN NAF, or with a closed air gap behind the FIBRANOR NAF / FIBRAPAN NAF for thicknesses equal or greater than 15mm or with an open air gap behind the FIBRANOR NAF / FIBRAPAN NAF for thicknesses equal or greater than 18 mm. Mounted with a closed air gap not more than 22 mm behind the FIBRANOR NAF / FIBRAPAN NAF classification D-s2,d2 in thicknesses between 10 and 18 mm. Commission Decision 2007/348/EC.

These physical-mechanical values improve/comply with those established by EN 622-5:2009 European Standard, Table 3. Requirements for boards for use in dry conditions (Type MDF).

FIBRANOR NAF / FIBRAPAN NAF are manufactured with formaldehyde-free resins.

FIBRANOR NAF / FIBRAPAN NAF is approved by the Air Reosurces Board of the State of California (CARB) and comply with phase 2 requirements on low formaldehyde emissions and with US EPA TSCA Title VI.

The performance of the reference product are in compliance with the performance declared above
This Declaration of Perfomance is issued under the sole responsibility of FINANCIERA MADERERA S.A. (FINSA)
Javier Portela
FINSA R&D + Quality Director
Santiago de Compostela 06/18/2019