Open new windowRecommend selecting the PDF printerSee all data sheets


FINANCIERA MADERERA S.A. (FINSA)
N-550, KM 57
15890 SANTIAGO DE COMPOSTELA (A CORUÑA)
SPAIN
DECLARATION OF PERFORMANCE Nº 0021410/26/2018
SUPERPAN MAP
Manufactured at: Luso Finsa
Estrada Nacional 234, Km 92.7
3524-952 NELAS (PORTUGAL)
PRODUCT TYPEINTENDED USEAVCP*NOTIFIED BODY AND REFERENCECERTIFICATE NUMBER
P4Internal use as structural component in dry conditions1AENOR 00990099/CPR/A65/0045
*Assessment and verification of constancy of performance system according to Annex V of regulation (EU) No 305/2011

PROPERTIESTEST METHOD UNITS THICKNESSES mm
15
CHARACTERISTIC STRENGTH
TABLE 5 EN 12369-1:2001
....
BENDING FMEN 13986:2004+A1:2015N/mm212.5
COMPRESSION FCEN 13986:2004+A1:2015N/mm211.1
TENSION FTEN 13986:2004+A1:2015N/mm27.9
PANEL SHEAR FVEN 13986:2004+A1:2015N/mm26.1
PLANAR SHEAR FREN 13986:2004+A1:2015N/mm21.6
CHARACTERISTIC STIFFNESS (MOE)
TABLE 5 EN 12369-1:2001
TENSION ETEN 13986:2004+A1:2015N/mm21700
COMPRESSION ECEN 13986:2004+A1:2015N/mm21700
BENDING EMEN 13986:2004+A1:2015N/mm22900
PANEL SHEAR FVEN 13986:2004+A1:2015N/mm2830
POINT LOAD FULS
FOR FLOORS AND ROOFS
EN 13986:2004+A1:2015N/mm2NPD
POINT LOAD MEAN STIFFNESS
FOR FLOORS AND ROOFS
EN 13986:2004+A1:2015N/mm2NPD
POINT LOAD SERVICEABILITY FSLS
FOR FLOORS AND ROOFS
EN 13986:2004+A1:2015N/mm2NPD
RACKING RESISTANCE
FOR WALLS
EN 13986:2004+A1:2015N/mm2NPD
SOFT BODY IMPACT RESISTANCE
PARA FORJADOS, CUBIERTAS Y MUROS
EN 13986:2004+A1:2015N/mm2NPD
TECHNICAL DATA-AVERAGE VALUES
Rev: 03/19/2018
PROPERTIESTEST METHOD UNITS THICKNESSES mm
15
DENSITY (*)EN 323kg/m3690
INTERNAL BONDEN 319N/mm20.35
BENDING STRENGTH EN 310N/mm221
MODULUS OF ELASTICITY EN 310 N/mm22800
THICKNESS SWELLING 24 H EN 317%15
SURFACE SOUNDNESS EN 311N/mm21.0
MOISTURE CONTENT EN 322%8+/-3
FORMALDEHYDE CONTENT EN ISO 12460-5mg/100 g≤ 8,0
REACTION TO FIREEN 13501-1EuroclassB-s1, d0
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α 0.10
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α 0.25
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (m·K)0.14
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015db27
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ 50
WATER VAPOUR PERMEABILITY
WET CUP
EN 13986:2004+A1:2015
μ
17
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use1
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015%< 5
MECHANICAL DURABILITYEN 13986:2004+A1:2015Kmod KdefEN 1995-1:2004 3.1 & 3.2
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

These physical-mechanical values improve/comply with the P4 classification established in EN 312:2010 European Standard, Table 6. Structural boards used in dry conditions (Type P4). Requirements for the specified mechanical and swelling properties.

This product meets Class E1 requirements (analysed according EN ISO 12460-5) as defined in EN 312:2010 European Standard.

This product is endorsed by AITIM Quality Labels.

The quality of this product is endorsed by AITIM Quality Labels and CE Marking verified by AENOR, certificate number 0099/CPR/A65/0045.

The performance of the reference product are in compliance with the performance declared above
This Declaration of Perfomance is issued under the sole responsibility of FINANCIERA MADERERA S.A. (FINSA)
Javier Portela
FINSA R&D + Quality Director
Santiago de Compostela 10/26/2018
Google+
Google+