Open new windowRecommend selecting the PDF printerSee all data sheets


FINANCIERA MADERERA S.A. (FINSA)
N-550, KM 57
15890 SANTIAGO DE COMPOSTELA (A CORUÑA)
SPAIN
DECLARATION OF PERFORMANCE Nº 0003010/26/2018
FIBRANOR MOISTURE RESISTANT / FIBRAPAN MOISTURE RESISTANT / IBERPAN MOISTURE RESISTANT
Manufactured at: Finsa Fibranor
Políg. Ind. de Rábade
27370 RÁBADE (ESPAÑA)
Manufactured at: Finsa Orember
Políg. Ind. San Cibrao das Viñas
32911 OURENSE (ESPAÑA)
Manufactured at: Luso Finsa
Estrada Nacional 234, Km 92.7
3524-952 NELAS (PORTUGAL)
Manufactured at: Finsa Padrón
Paraíso s/n
15900 PADRÓN (ESPAÑA)
PRODUCT TYPEINTENDED USEAVCP*
MDF.HIndoor use as structural element in humid conditions4
*Assessment and verification of constancy of performance system according to Annex V of regulation (EU) No 305/2011

TECHNICAL DATA-AVERAGE VALUES
Rev: 05/29/2018
PROPERTIESTEST METHOD UNITS THICKNESSES mm
>2.5/4>4/6>6/9>9/12>12/19>19/30>30/45>45/60
DENSITY (*)EN 323kg/m3880/860855/830825/770765/745745/730730/715730/675700/650
INTERNAL BONDEN 319N/mm20.900.850.800.800.750.750.700.60
BENDING STRENGTH EN 310N/mm22727272624222119
MODULUS OF ELASTICITY EN 310 N/mm227002700270025002400230023002200
THICKNESS SWELLING 24 H EN 317%301812108776
DIMENSIONAL MOVEMENT LENGTH/WIDTH EN 318%0.40.40.40.40.30.30.20.2
DIMENSIONAL MOVEMENT TICKNESS EN 318%66665544
SURFACE SOUNDNESS EN 311N/mm2>1.2>1.2>1.2>1.2>1.2>1.2>1.2>1.2
SURFACE ABSORPTION (TWO FACES) EN 382-1mm>150>150>150>150>150>150>150>150
MOISTURE CONTENT EN 322%7+/-37+/-37+/-37+/-37+/-37+/-37+/-37+/-3
GRIT CONTENT ISO 3340 % Weight≤ 0.05≤ 0.05≤ 0.05≤ 0.05≤ 0.05≤ 0.05≤ 0.05≤ 0.05
FORMALDEHYDE CONTENT EN ISO 12460-5mg/100 g≤ 8≤ 8≤ 8≤ 8≤ 8≤ 8≤ 8≤ 8
REACTION TO FIRETABLA EN 13986:2004+A1:2015 IEN 13501-1ClassEEED-s2,d0 (**)D-s2,d0 (***)D-s2,d0D-s2,d0D-s2,d0
SWELLING IN THICKNESS AFTER CYCLIC TEST (V313)EN 321 / EN 317%4025191615151515
INTERNAL BOND AFTER CYCLIC TEST (V313)EN 321 / EN 319N/mm20,350.350,300,250,200,150,100,10
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α 0,100,100,100,100,100,100,100,10
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α 0,200,200,200,200,200,200,200,20
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (m·K)0,150,150,140,130,120.120,120.11
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015dbNPDNPD252528303234
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ 3130282725242423
WATER VAPOUR PERMEABILITY
WET CUP
EN 13986:2004+A1:2015
μ
21
20
18
17
16
15
15
14
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use1 y 21 y 21 y 21 y 21 y 21 y 21 y 21 y 2
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015%<5<5<5<5<5<5<5<5
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

(**) Mounted without an air gap behind the FIBRANOR/FIBRAPAN/IBERPAN HIDROFUGO. Mounted with a closed air gap not more than 22 mm behind the FIBRANOR/FIBRAPAN/IBERPAN HIDROFUGOclassificationD-s2,d2. Classification E for any other more restrictive condition. Commission Decision 2007/348/EC.

(***) Mounted without an air gap behind the FIBRANOR/FIBRAPAN/IBERPAN HIDROFUGO, or with a closed air gap behind the FIBRANOR/FIBRAPAN/IBERPAN HIDROFUGO for thicknesses equal or greater than 15mm or with an open air gap behind the FIBRANOR/FIBRAPAN/IBERPAN HIDROFUGO for thicknesses equal or greater than 18 mm. Mounted with a closed air gap not more than 22 mm behind the FIBRANOR/FIBRAPAN/IBERPAN HIDROFUGO classification D-s2,d2 in thicknesses between 10 and 18 mm. Commission Decision 2007/348/EC.

These physical-mechanical values improve/comply with those established in EN 622-5:2009 European Standard, Table 4, Option 1. Requirements for boards for gereral use in humid conditions (Type MDF.H).

FIBRANOR/FIBRAPAN/IBERPAN HIDROFUGO meet Class E1 requirements (analysed according EN ISO 12460-5) as defined in EN 622-1 European Standard.

The quality of FIBRANOR/FIBRAPAN/IBERPAN HIDROFUGO is endorsed by AITIM Quality Labels AITIM 9-04-08 and 9-4-09,

Fibranor Strip H/Fibrapan Strip H/Iberpan Strip H meet the physical-mechanical characteristics described in this technical data sheet.

The performance of the reference product are in compliance with the performance declared above
This Declaration of Perfomance is issued under the sole responsibility of FINANCIERA MADERERA S.A. (FINSA)
Javier Portela
FINSA R&D + Quality Director
Santiago de Compostela 10/26/2018
Google+
Google+