ENGLISH FIBRANOR PT

	FINANCIERA MADERERA S.A. (FINSA) N-550, KM 57 15890 SANTIAGO DE COMPOSTELA (A CORUÑA) SPAIN
DECLARATION OF PERFORMANCE Nº 00151	10/26/2018

FIBRANOR PT
Manufactured at: Finsa Fibranor Políg. Ind. de Rábade 27370 RÁBADE (ESPAÑA)
PRODUCT TYPE	INTENDED USE	AVCP*
MDF	Internal use as non structural component in dry conditions	4
*Assessment and verification of constancy of performance system according to Annex V of regulation (EU) No 305/2011

TECHNICAL DATA-AVERAGE VALUES Rev: 01/17/2018
PROPERTIES	TEST METHOD	UNITS	THICKNESSES mm
			4	>4-6	>6-6.9
DENSITY (*)	EN 323	kg/m3	930	930	930
INTERNAL BOND	EN 319	N/mm2	1,6	1,5	1,5
BENDING STRENGTH	EN 310	N/mm2	40	40	40
MODULUS OF ELASTICITY	EN 310	N/mm2	3000	3000	3000
THICKNESS SWELLING 24 H	EN 317	%	30	22	15
DIMENSIONAL MOVEMENT LENGTH/WIDTH	EN 318	%	0,4	0,4	0,4
DIMENSIONAL MOVEMENT TICKNESS	EN 318	%	10	10	6
SURFACE SOUNDNESS	EN 311	N/mm2	>1,2	>1,2	>1,2
SURFACE ABSORPTION (TWO FACES)	EN 382-1	mm	>150	>150	>150
MOISTURE CONTENT	EN 322	%	7+/-3	7+/-3	7+/-3
GRIT CONTENT	ISO 3340	% Weight	≤ 0,05	≤ 0,05	≤ 0,05
FORMALDEHYDE CONTENT	EN ISO 12460-5	mg/100 g	≤ 8	≤ 8	≤ 8
REACTION TO FIRETABLA EN 13986:2004+A1:2015 I	EN 13501-1	Class	E (**)	E (**)	E (**)
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)	EN 13984:2004+A1:2015	α	0.10	0.10	0.10
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)	EN 13984:2004+A1:2015	α	0.20	0.20	0.20
THERMAL CONDUCTIVITY	EN 13984:2004+A1:2015	W/ (m·K)	0.19	0.19	0.19
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)	EN 13986:2004+A1:2015	db	NPD	23	24
WATER VAPOUR PERMEABILITY DRY CUP	EN 13986:2004+A1:2015	μ	37	37	37
WATER VAPOUR PERMEABILITY WET CUP	EN 13986:2004+A1:2015	μ	25	25	25
BIOLOGICAL DURABILITY USE	EN 13986:2004+A1:2015	Class of use	1	1	1
CONTENT OF PENTACHLOROPHENOL (PCP)	EN 13986:2004+A1:2015	%	< 5	< 5	< 5

(*) Values to be considered as a rough guide only.

(**) Commission Decision 2007/348/EC.

These physical-mechanical values improve/comply with those established by EN 622-5:2009 European Standard, Table 3. General requirements for boards to be used in dry conditions.

FIBRANOR PT meet Class E1 requirements (analysed according to EN ISO 12460-5) as defined in EN 622-1:2003 European Standard.

The performance of the reference product are in compliance with the performance declared above This Declaration of Perfomance is issued under the sole responsibility of FINANCIERA MADERERA S.A. (FINSA)
Javier Portela FINSA R&D + Quality Director Santiago de Compostela 10/26/2018