Open new windowRecommend selecting the PDF printerSee all data sheets


FINANCIERA MADERERA S.A. (FINSA)
N-550, KM 57
15890 SANTIAGO DE COMPOSTELA (A CORUÑA)
SPAIN
DECLARATION OF PERFORMANCE Nº 0021610/26/2018
FIBRAPAN LIT IGNIFUGO
Manufactured at: Finsa Padrón
Paraíso s/n
15900 PADRÓN (ESPAÑA)
PRODUCT TYPEINTENDED USEAVCP*NOTIFIED BODY AND REFERENCECERTIFICATE NUMBER
L-MDFInternal use as non structural component in dry conditions1AENOR 00990099/CPR/A65/0051
*Assessment and verification of constancy of performance system according to Annex V of regulation (EU) No 305/2011

TECHNICAL DATA-AVERAGE VALUES
Rev: 05/25/2018
PROPERTIESTEST METHOD UNITS THICKNESSES mm
10/12>12/19>19/30
DENSITY (*)EN 323kg/m3630600600
INTERNAL BONDEN 319N/mm20.450.450.45
BENDING STRENGTH EN 310N/mm2201815
MODULUS OF ELASTICITY EN 310 N/mm2170016001500
THICKNESS SWELLING 24 H EN 317%161412
DIMENSIONAL MOVEMENT LENGTH/WIDTH EN 318%0.50.50.4
DIMENSIONAL MOVEMENT TICKNESS EN 318%776
SURFACE ABSORPTION (TWO FACES) EN 382-1mm> 150> 150> 150
MOISTURE CONTENT EN 322%7+/-37+/-37+/-3
FORMALDEHYDE CONTENT EN ISO 12460-5mg/100 g≤ 8≤ 8≤ 8
REACTION TO FIREEN 13501-1EuroclassB-s2,d0B-s2,d0B-s2,d0
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α 0.100.100.10
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α 0.200.200.20
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (m·K)0.110.100.10
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015db252730
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ 222020
WATER VAPOUR PERMEABILITY
WET CUP
EN 13986:2004+A1:2015
μ
13
12
12
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use111
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015%< 5< 5< 5
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

These physical-mechanical values improve/comply with those established by EN 622-5:2009 European Standard, Table 7. Requirements for general purspose MDF lightweight boards for use in dry conditions (Type L- MDF.E1).

FIBRAPAN LIT IGNIFUGO meets Class E1 requirements (analysed according to EN ISO 12460-5) as defined in EN 622-1:2003 European Standard.

The quality of FIBRAPAN LIT IGNIFUGO is endorsed by AITIM Quality Labels

FIBRAPAN LIT IGNIFUGO holds CE certificate of conformity of the factory production control issued by AENOR, number 0099/CPR/A65/0051.

The performance of the reference product are in compliance with the performance declared above
This Declaration of Perfomance is issued under the sole responsibility of FINANCIERA MADERERA S.A. (FINSA)
Javier Portela
FINSA R&D + Quality Director
Santiago de Compostela 10/26/2018
Google+
Google+