Open new windowRecommend selecting the PDF printerSee all data sheets


FINANCIERA MADERERA S.A. (FINSA)
N-550, KM 57
15890 SANTIAGO DE COMPOSTELA (A CORUÑA)
SPAIN
DECLARATION OF PERFORMANCE Nº 0011710/26/2018
FIBRAPAN EXTERIOR
Manufactured at: Finsa Padrón
Paraíso s/n
15900 PADRÓN (ESPAÑA)
PRODUCT TYPEINTENDED USEAVCP*
MDF.HIndoor use as structural element in humid conditions4
*Assessment and verification of constancy of performance system according to Annex V of regulation (EU) No 305/2011

TECHNICAL DATA-AVERAGE VALUES
Rev: 11/11/2015
PROPERTIESTEST METHOD UNITS THICKNESSES mm
>12 - 19>19 - 30
DENSITY (*)EN 323kg/m3840 - 820815 - 810
INTERNAL BONDEN 319N/mm21.01.0
BENDING STRENGTH EN 310N/mm23028
MODULUS OF ELASTICITY EN 310 N/mm227002600
THICKNESS SWELLING 24 H EN 317%77
DIMENSIONAL MOVEMENT LENGTH/WIDTH EN 318%0.30.3
DIMENSIONAL MOVEMENT TICKNESS EN 318%55
SURFACE SOUNDNESS EN 311N/mm2>1.2>1.2
SURFACE ABSORPTION (TWO FACES) EN 382-1mm>150>150
MOISTURE CONTENT EN 322%7+/-37+/-3
FORMALDEHYDE CONTENT EN ISO 12460-5mg/100 g≤8,0≤8,0
REACTION TO FIRETABLA EN 13986:2004+A1:2015 IEN 13501-1ClassD-s2,d0 (**)D-s2,d0
INTERNAL BOND AFTER BOIL TEST (OPTION 2)EN 1087-1 / EN 319N/mm20.120.12
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α 0.100.10
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α 0.200.20
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (m·K)0.140.14
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015db2830
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ 21 / 3120 / 30
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use1 & 21 & 2
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015%<5<5
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

(**) Mounted without an air gap behind the FIBRAPAN EXTERIOR, or with a closed air gap behind the FIBRAPAN EXTERIOR for thicknesses equal or greater than 15mm or with an open air gap behind the FIBRAPAN EXTERIOR for thicknesses equal or greater than 18 mm. Mounted with a closed air gap not more than 22 mm behind the FIBRAPAN EXTERIOR classification D-s2,d2 in thicknesses between >12mm and 18 mm. Commission Decision 2007/348/EC.

These physical-mechanical values improve/comply with those established in EN 622-5:2009 European Standard, Table 4, Option 2. Requirements for general purpose boards for use in humid conditions (Type MDF.H).

FIBRAPAN EXTERIOR meet Class E1 requirements (analysed according EN 120) as defined in EN 622-1:2003 European Standard.

The performance of the reference product are in compliance with the performance declared above
This Declaration of Perfomance is issued under the sole responsibility of FINANCIERA MADERERA S.A. (FINSA)
Javier Portela
FINSA R&D + Quality Director
Santiago de Compostela 10/26/2018