Open new windowRecommend selecting the PDF printerSee all data sheets


FINANCIERA MADERERA S.A. (FINSA)
N-550, KM 57
15890 SANTIAGO DE COMPOSTELA (A CORUÑA)
SPAIN
DECLARATION OF PERFORMANCE Nº 0010410/26/2018
SUPERPAN H DECK
Manufactured at: Luso Finsa
Estrada Nacional 234, Km 92.7
3524-952 NELAS (PORTUGAL)
PRODUCT TYPEINTENDED USEAVCP*NOTIFIED BODY AND REFERENCECERTIFICATE NUMBER
P3Internal use as nonstructural component in humid conditions4--
*Assessment and verification of constancy of performance system according to Annex V of regulation (EU) No 305/2011

TECHNICAL DATA-AVERAGE VALUES
Rev: 03/01/2018
PROPERTIESTEST METHOD UNITS THICKNESSES mm
10-12>12-20
DENSITY (*)EN 323kg/m3700680
INTERNAL BONDEN 319N/mm20,450,45
BENDING STRENGTH EN 310N/mm21616
MODULUS OF ELASTICITY EN 310 N/mm224002300
THICKNESS SWELLING 24 H EN 317%1714
FORMALDEHYDE EMISSION CLASS E1EN ISO 12460-3mg/(m2.h)<3.5<3.5
REACTION TO FIRETABLA EN 13986:2004+A1:2015 IEN 13501-1ClassD-d2,d0 (**)D-s2,d0 (***)
REACTION TO FIRETABLA EN 13986:2004+A1:2015 IEN 13501-1ClassDfl-s1Dfl-s1
SWELLING IN THICKNESS AFTER CYCLIC TEST (V313)EN 321 / EN 317%1413
INTERNAL BOND AFTER CYCLIC TEST (V313)EN 321 / EN 319N/mm20.150.13
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α 0.100.10
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α 0.250.25
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (m·K)0.140.13
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015db2428
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ 5050
WATER VAPOUR PERMEABILITY
WET CUP
EN 13986:2004+A1:2015
μ
16
16
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use1 & 21 & 2
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015%<5<5
(*) Values to be considered as a rough guide only.

(**) Mounted without an air gap behind the SUPERPAN H DECK. Mounted with a closed air gap not more than 22 mm behind the SUPERPAN H DECK classification D-s2,d2. Classification E for any other more restrictive condition. Commission Decision 2007/348/EC.

(***) Mounted without an air gap behind the SUPERPAN H DECK, or with a closed air gap behind the SUPERPAN H DECK for thicknesses equal or greater than 15mm or with an open air gap behind the SUPERPAN H DECK for thicknesses equal or greater than 18 mm. Mounted with a closed air gap not more than 22 mm behind the SUPERPAN H DECK classification D-s2,d2 in thicknesses between 10 and 18 mm. Commission Decision 2007/348/EC.

These physical-mechanical values improve/comply with the P3 classification established in EN 312:2010 European Standard, Tables 4 and 5. Non-structural boards used in moist environments (Type P3). Requirements for the specified mechanical and swelling properties. Requirements for the resistance to moisture (Option 1).

SUPERPAN H DECK meets Class E1 requirements as defined in EN 14322:2017 European Standard.

The performance of the reference product are in compliance with the performance declared above
This Declaration of Perfomance is issued under the sole responsibility of FINANCIERA MADERERA S.A. (FINSA)
Javier Portela
FINSA R&D + Quality Director
Santiago de Compostela 10/26/2018