Open new windowRecommend selecting the PDF printerSee all data sheets


FINANCIERA MADERERA S.A. (FINSA)
N-550, KM 57
15890 SANTIAGO DE COMPOSTELA (A CORUÑA)
SPAIN
DECLARATION OF PERFORMANCE Nº 0000601/14/2019
IBERPAN
Manufactured at: Luso Finsa
Estrada Nacional 234, Km 92.7
3524-952 NELAS (PORTUGAL)
Manufactured at: Finsa Orember
Políg. Ind. San Cibrao das Viñas
32911 OURENSE (ESPAÑA)
PRODUCT TYPEINTENDED USEAVCP*
MDFInternal use as non structural component in dry conditions4
*Assessment and verification of constancy of performance system according to Annex V of regulation (EU) No 305/2011

TECHNICAL DATA-AVERAGE VALUES
Rev: 01/14/2018
PROPERTIESTEST METHOD UNITS THICKNESSES mm
>30/45>45/60>60/7080
DENSITY (*)EN 323kg/m3680/675675/640610580
INTERNAL BONDEN 319N/mm20,550,500,500.50
BENDING STRENGTH EN 310N/mm220171616
MODULUS OF ELASTICITY EN 310 N/mm22000180017001700
THICKNESS SWELLING 24 H EN 317%8666
DIMENSIONAL MOVEMENT LENGTH/WIDTH EN 318%0,250,250,250.25
DIMENSIONAL MOVEMENT TICKNESS EN 318%5555
SURFACE SOUNDNESS EN 311N/mm21,21,21,21.2
SURFACE ABSORPTION (TWO FACES) EN 382-1mm>150>150>150>150
MOISTURE CONTENT EN 322%7+/-37+/-37+/-37+/-3
GRIT CONTENT ISO 3340 % Weight≤ 0.05≤ 0.05≤ 0.05≤ 0.05
FORMALDEHYDE CONTENT EN ISO 12460-5mg/100 g≤ 8≤ 8≤ 8≤ 8
SCREW HOLDING. EDGEEN 320N700700700700
SCREW HOLDING. SURFACEEN 320N1000100010001000
REACTION TO FIRETABLA 8 EN 13986:2004+A1:2015 IEN 13501-1ClassD-s2,d0(**)D-s2,d0(**)D-s2,d0(**)E (**)
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ)EN 13984:2004+A1:2015α 0.10.10.10.1
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ)EN 13984:2004+A1:2015α 0.20.20.20.2
THERMAL CONDUCTIVITYEN 13984:2004+A1:2015W/ (m·K)0.120.110.100.10
AIRBORNE SOUND INSULATION (SURFACE MASS) (R)EN 13986:2004+A1:2015db30/3333/3434/3535
WATER VAPOUR PERMEABILITY DRY CUPEN 13986:2004+A1:2015μ 24232019
15
14
12
11
BIOLOGICAL DURABILITY USEEN 13986:2004+A1:2015Class of use1111
CONTENT OF PENTACHLOROPHENOL (PCP)EN 13986:2004+A1:2015%<5<5<5<5
(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

(**)Commission Decision 2007/348/EC.

These physical-mechanical values improve/comply with those established in EN 622-5:2009 European Standard, Table 3. Requirements for boards used in dry environments.

IBERPAN meets Class E1 requirements (analysed according EN120) as defined in EN 622-1:2003 European Standard.

IBERPAN STRIP meets the physical-mechanical characteristics described in this technical data sheet.

The quality of IBERPAN is endorse by AITIM Quality Labels

The performance of the reference product are in compliance with the performance declared above
This Declaration of Perfomance is issued under the sole responsibility of FINANCIERA MADERERA S.A. (FINSA)
Javier Portela
FINSA R&D + Quality Director
Santiago de Compostela 01/14/2019
Google+
Google+